; This file is used by import and export to set formatting options for
; font, justification, lineweight, and linestyle.


; SETUP
;
; This section determines which of the 4 properties are being mapped.
; The heading is the Fme string which defines the format, followed by an
; underscore, followed by "FieldMapping". The format name must be matched
; exactly. The section body indicates the field which contains the 
; property in the foreign format followed by the type of mapping to do.

[IGDS_FieldMapping]
igds_font=MapFont
idgs_justification=MapJustification
igds_weight=MapLineWeight
igds_style=MapLineStyle

[MIF_FieldMapping]
mif_text_justification=MapJustification

[E00_FieldMapping]
e00_text_just=MapJustification

[ARCINFO_FieldMapping]
e00_text_just=MapJustification

; TRANSLATION
; 
; The translation sections consist of the exact format name followed
; by underscore followed by the property type.
; The mappings show the foreign value first followed by an equal sign
; followed by the Autodesk Map value. The mappings are suggested defaults
; and may not be suitable for your particular case.
; Mappings further down the list replace earlier ones where identical, depending
; on the direction of translation. Identical mappings may occur when one side
; of the equation has more values than the other.
; For example, for MIF when the direction is import, MIF justifications
; left, center, and right map to the last three values as shown, BottomLeft, 
; BottomCenter, and BottomRight. In the mapping example below if text in
; Autodesk Map is BottomLeft it will return as TopLeft when round tripping.
;
; left=TopLeft    
; center=TopCenter  
; right=TopRight   
; left=MiddleLeft 
; center=MiddleCenter 
; right=MiddleRight  
; left=BottomLeft 
; center=BottomCenter 
; right=BottomRight

; Another example, for E00, when the direction is export TopLeft, MiddleLeft,
: and BottomLeft map to 7, 4, and 1 but this does not replace the
; 10=BottomLeft mapping on import.

; 10=BottomLeft
; 11=MiddleLeft
; 12=TopLeft
; 1=BottomLeft 
; 2=BottomCenter 
; 3=BottomRight  
; 4=MiddleLeft 
; 5=MiddleCenter 
; 6=MiddleRight  
; 7=TopLeft    
; 8=TopCenter  
; 9=TopRight
					   
; DGN FONTS (TEXT STYLES)
;
; This shows a sample translation from DGN font numbers to ACAD textstyles.
; These will change on a project by project or drawing by drawing basis.
; You will have to create TextStyles and a usable mapping for your drawing.
; Note that this default mapping only has the Standard text style.

[IGDS_Font] 
0=Arial
1=Times New Roman  
2=romans
3=simplex
4=SansSerif
5=Standard

;DGN LINESTYLES
;
; This is the translation from DGN line styles into ADC's current model.  
; These line styles will have to be loaded into the Autodesk Map drawing.
;
[IGDS_LineStyle] 
0=CONTINUOUS
1=DOT2
2=HIDDEN2
3=HIDDENX2
4=BORDER
5=HIDDEN2
6=DIVIDE
7=CENTER

; DGN JUSTIFICATION
;
; This maps from the DGN justification into AutoCAD vertical 
; and horizontal modes or AutoCAD attachment.
; DGN justification values range from 0-14.
; 0 is Left/Top			8 is Center/Bottom
; 1 is Left/Center		9 is Right Margin/Top
; 2 is Left/Bottom		10 is Right Margin/Center
; 3 is Left Margin/Top		11 is Right Margin/Bottom
; 4 is Left Margin/Center 	12 is Right/Top
; 5 is Center/Bottom		13 is Right/Center
; 6 is Center/Top		14 is Right/Bottom
; 7 is Center/Center		Default is 5
;
; The following values are supported for Autodesk Map justifications:
; TopLeft    
; TopCenter  
; TopRight   
; MiddleLeft 
; MiddleCenter 
; MiddleRight  
; BottomLeft 
; BottomCenter 
; BottomRight  
; BaseLeft     
; BaseCenter   
; BaseRight    
; BaseAlign    
; BottomAlign  
; MiddleAlign  
; TopAlign     
; BaseFit      
; BottomFit    
; MiddleFit    
; TopFit       
; BaseMid      
; BottomMid    
; MiddleMid    
; TopMid
;
; The mapping below is reasonably valid for most situations. You must
; edit the mappings to produce the results that you want.

[IGDS_Justification] 
0=TopLeft	
1=MiddleLeft	
2=BottomLeft	
3=TopLeft	
4=MiddleLeft 
5=BottomCenter	
6=TopCenter	
7=MiddleCenter	
8=BottomCenter 
9=TopLeft	
10=MiddleLeft	
11=BottomLeft	
12=TopRight 
13=MiddleRight
14=BottomRight
;Default is 5

; DGN LINEWEIGHT
;
; DGN lineweight range is 0-31. Autodesk Map lineweights are in
; 100ths of a millimeter and only the exact values in the second
; column are supported. The correct DGN mapping depends on how
; the DGN project is set up. Autodesk Map values -1, -2, and -3
; indicate by layer, by block, and by lineweight default respectively. 
; The allowable Autodesk Map lineweight values are:
; 0, 5, 9, 13, 15, 18, 20, 25, 30, 35, 40, 50, 53, 60, 70, 80, 90,
; 100, 106, 120, 140, 158, 200, 211, -1, -2 and -3

[IGDS_LineWeight]
0=0
0=5
0=9
0=13
0=15
0=18
0=20
1=25
1=30
1=35
1=40
2=50
2=53
2=60
2=70
3=80
3=90
4=100
4=106
4=120
5=140
6=158
8=200
8=211
0=-1
0=-2
0=-3

; MIF JUSTIFICATION
;
; Allowed Mif Justifications are left, center, and right.
; When importing from Mif to Autodesk Map, the last mapping in the table
; will be used.
;
[MIF_Justification]
left=TopLeft    
center=TopCenter  
right=TopRight   
left=MiddleLeft 
center=MiddleCenter 
right=MiddleRight  
left=BottomLeft 
center=BottomCenter 
right=BottomRight  

; E00 and Coverage use the same justifications. 10=BottomLeft is at the top
; so that BottonLeft will export to 1. The Autodesk Map justifications used
; here are the most common text placements.

; E00 JUSTIFICATION
;
[E00_Justification]
10=BottomLeft
11=MiddleLeft
12=TopLeft
1=BottomLeft 
2=BottomCenter 
3=BottomRight  
4=MiddleLeft 
5=MiddleCenter 
6=MiddleRight  
7=TopLeft    
8=TopCenter  
9=TopRight   

;ARCINFO JUSTIFICATION
;
[ARCINFO_Justification]
10=BottomLeft
11=MiddleLeft
12=TopLeft
1=BottomLeft 
2=BottomCenter 
3=BottomRight  
4=MiddleLeft 
5=MiddleCenter 
6=MiddleRight  
7=TopLeft    
8=TopCenter  
9=TopRight