//
//      AutoCAD 2002 Menu
//      Feb. 5, 2001
//
//      Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1994, 1996, 1997, 
//      1998, 1999, 2000, 2001 by Autodesk, Inc.
//
//      Permission to use, copy, modify, and distribute this software
//      for any purpose and without fee is hereby granted, provided that
//      the above copyright notice appears in all copies and that both
//      the copyright notice and the limited warranty and restricted rights
//      notice below appear in all supporting documentation.
//
//      AUTODESK, INC. PROVIDES THIS PROGRAM "AS IS" AND WITH ALL FAULTS.
//      AUTODESK, INC. SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF
//      MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE.  AUTODESK, INC.
//      DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE
//      UNINTERRUPTED OR ERROR FREE.
//
//      Use, duplication, or disclosure by the U.S. Government is subject to
//      restrictions set forth in FAR 52.227-19 (Commercial Computer
//      Software - Restricted Rights) and DFAR 252.227-7013(c)(1)(ii)
//      (Rights in Technical Data and Computer Software), as applicable.
//
//
//      NOTE:  AutoCAD looks for an ".mnl" (Menu Lisp) file whose name is
//             the same as that of the menu file, and loads it if
//             found.  If you modify this menu and change its name, you
//             should copy acad.mnl to <yourname>.mnl, since the menu
//             relies on AutoLISP routines found there.
//

//
//      Default AutoCAD NAMESPACE declaration:
//
***MENUGROUP=ACAD

//
//   Begin AutoCAD Digitizer Button Menus
//
***BUTTONS1
// Simple + button
// if a grip is hot bring up the Grips Cursor Menu (POP 500), else send a carriage return
// If the SHORTCUTMENU sysvar is not 0 the first item (for button 1) is NOT USED.
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,5),GRIP_),$P0=ACAD.GRIPS $P0=*);
$P0=SNAP $p0=*
^C^C
^B
^O
^G
^D
^E
^T

***BUTTONS2
// Shift + button
$P0=SNAP $p0=*

***BUTTONS3
// Control + button

***BUTTONS4
// Control + shift + button

//
//   Begin System Pointing Device Menus
//
***AUX1
// Simple button
// if a grip is hot bring up the Grips Cursor Menu (POP 500), else send a carriage return
// If the SHORTCUTMENU sysvar is not 0 the first item (for button 1, the "right button")
// is NOT USED.
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,5),GRIP_),$P0=ACAD.GRIPS $P0=*);
$P0=SNAP $p0=*
^C^C
^B
^O
^G
^D
^E
^T


***AUX2
// Shift + button
$P0=SNAP $p0=*
$P0=SNAP $p0=*

***AUX3
// Control + button
$P0=SNAP $p0=*

***AUX4
// Control + shift + button
$P0=SNAP $p0=*

//
//   Begin AutoCAD Pull-down Menus
//
***POP0
**SNAP
// Shift-right-click if using the default AUX2 and/or BUTTONS2
// menus.
             [&Object Snap Cursor Menu]
ID_Tracking  [Temporary trac&k point]_tt
ID_From      [&From]_from
ID_MnPointFi [->Poin&t Filters]
ID_PointFilx   [.X].X
ID_PointFily   [.Y].Y
ID_PointFilz   [.Z].Z
			   [--]
ID_PointFixy   [.XY].XY
ID_PointFixz   [.XZ].XZ
ID_PointFiyz   [<-.YZ].YZ
             [--]
ID_OsnapEndp [&Endpoint]_endp
ID_OsnapMidp [&Midpoint]_mid
ID_OsnapInte [&Intersection]_int
ID_OsnapAppa [&Apparent Intersect]_appint
ID_OsnapExte [E&xtension]_ext
             [--]
ID_OsnapCent [&Center]_cen
ID_OsnapQuad [&Quadrant]_qua
ID_OsnapTang [Tan&gent]_tan
             [--]
ID_OsnapPerp [&Perpendicular]_per
ID_OsnapPara [Para&llel]_par
ID_OsnapNode [No&de]_nod
ID_OsnapInse [In&sert]_ins
ID_OsnapNear [Nea&rest]_nea
ID_OsnapNone [&None]_non
             [--]
ID_Osnap     [&Osnap Settings...]'_+dsettings 2


***POP1
**FILE
ID_MnFile    [&File]
ID_New       [&New...\tCtrl+N]^C^C_new
ID_Open      [&Open...\tCtrl+O]^C^C_open
ID_DWG_CLOSE [&Close]^C^C_close
ID_PartialOp [$(if,$(eq,$(getvar,fullopen),0),,~)Partia&l Load]^C^C_partiaload
             [--]
ID_Save      [&Save\tCtrl+S]^C^C_qsave
ID_Saveas    [Save &As...]^C^C_saveas
ID_ETransmit [e&Transmit...]^C^C_etransmit
ID_Publish   [Publish to &Web...]^C^C_publishtoweb
ID_Export    [&Export...]^C^C_export
             [--]
ID_PlotSetup [Pa&ge Setup...]^C^C_pagesetup
ID_PlotMgr   [Plotter &Manager...]^C^C_plottermanager
ID_PlotStyMgr [Plot St&yle Manager...]^C^C_stylesmanager
ID_Preview   [Plot Pre&view]^C^C_preview
ID_Print     [&Plot...\tCtrl+P]^C^C_plot
             [--]
ID_MnDrawing [->Drawing &Utilities]
ID_Audit       [&Audit]^C^C_audit
ID_Recover     [&Recover...]^C^C_recover
               [--]
ID_BupdateA    [&Update Block Icons]^C^C_blockicon
               [--]
ID_Purge       [<-&Purge...]^C^C_purge
ID_SendMail  [Sen&d...]
ID_Props     [Drawing Propert&ies...]^C^C_dwgprops
             [--]
ID_MRU       [Drawing History]
             [--]
ID_APP_EXIT  [E&xit]^C^C_quit

***POP2
**EDIT
ID_MnEdit    [&Edit]
ID_U         [&Undo\tCtrl+Z]_u
ID_Redo      [&Redo\tCtrl+Y]^C^C_redo
             [--]
ID_Cutclip   [Cu&t\tCtrl+X]^C^C_cutclip
ID_Copyclip  [&Copy\tCtrl+C]^C^C_copyclip
ID_Copybase  [Copy with &Base Point]^C^C_copybase
ID_Copylink  [Copy &Link]^C^C_copylink
ID_Pasteclip [&Paste\tCtrl+V]^C^C_pasteclip
ID_Pastebloc [Paste as Bloc&k]^C^C_pasteblock
ID_Pastehlnk [Paste as &Hyperlink]^C^C_pasteashyperlink
ID_Pasteorig [Paste to Original Coor&dinates]^C^C_pasteorig
ID_Pastesp   [Paste &Special...]^C^C_pastespec
             [--]
ID_Erase     [Cle&ar\tDel]^C^C_erase
ID_SelAll    [Se&lect All\tCtrl+A]^C^C_ai_selall
             [--]
ID_Links     [&OLE Links...]^C^C_olelinks
             [--]
ID_TextFind  [&Find...]^C^C_find

***POP3
**VIEW
ID_MnView    [&View]
ID_Redrawall [&Redraw]'_redrawall
ID_Regen     [Re&gen]^C^C_regen
ID_Regenall  [Regen &All]^C^C_regenall
             [--]
ID_MnZoom    [->&Zoom]
ID_ZoomRealt   [&Realtime]'_zoom ;
               [--]
ID_ZoomPrevi   [&Previous]'_zoom _p
ID_ZoomWindo   [&Window]'_zoom _w
ID_ZoomDynam   [&Dynamic]'_zoom _d
ID_ZoomScale   [&Scale]'_zoom _s
ID_ZoomCente   [&Center]'_zoom _c
               [--]
ID_ZoomIn      [&In]'_zoom 2x
ID_ZoomOut     [&Out]'_zoom .5x
               [--]
ID_ZoomAll     [&All]'_zoom _all
ID_ZoomExten   [<-&Extents]'_zoom _e
ID_MnPan     [->&Pan]
ID_Pan         [Real&time]'_pan
ID_PanPick     [&Point]'_-pan
               [--]
ID_PanLeft     [&Left]^P'_-pan (trans (list (* -0.2 (getvar "viewsize")) 0) 0 1) ;^P
ID_PanRight    [&Right]^P'_-pan (trans (list (* 0.2 (getvar "viewsize")) 0) 0 1) ;^P
ID_PanUp       [&Up]^P'_-pan (trans (list 0 (* 0.2 (getvar "viewsize"))) 0 1) ;^P
ID_PanDown     [<-&Down]^P'_-pan (trans (list 0 (* -0.2 (getvar "viewsize"))) 0 1) ;^P
ID_Dsviewer  [Aerial Vie&w]'_dsviewer
             [--]
ID_MnTiledVi [->&Viewports]
ID_Ai_tiledv   [&Named Viewports...]^C^C_+vports 1
               [--]						   
ID_VportsSav   [N&ew Viewports...]^C^C_+vports 0
ID_VportsSin   [&1 Viewport]^C^C$M=$(if,$(eq,$(getvar,tilemode),1),^C^C_-vports _si,^C^C_-vports)
ID_Vports2     [&2 Viewports]^C^C_-vports _2
ID_Vports3     [&3 Viewports]^C^C_-vports _3
ID_Vports4     [&4 Viewports]^C^C_-vports _4
ID_VportsRes   [$(if,$(eq,$(getvar,tilemode),1),~)&Polygonal Viewport]^C^C_-vports _p
ID_VportsDel   [$(if,$(eq,$(getvar,tilemode),1),~)&Object]^C^C_-vports _o
               [--] 
ID_VportsJoi   [<-$(if,$(eq,$(getvar,tilemode),0),~)&Join]^C^C_-vports _j
ID_Ddview    [&Named Views...]^C^C_view
ID_MnViewpoi [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)&3D Views]
ID_Ddvpoint    [V&iewpoint Presets...]^C^C_ddvpoint
ID_VpointTri   [&Viewpoint]^C^C_vpoint ;
ID_MnPlanView  [->&Plan View]
ID_PlanCurre     [&Current UCS]^C^C_plan ;
ID_PlanWorld     [&World UCS]^C^C_plan _w
ID_PlanUCS       [<-&Named UCS]^C^C_plan _u
               [--]
ID_VpointTop   [&Top]^C^C_-view _top
ID_VpointBot   [&Bottom]^C^C_-view _bottom
ID_VpointLef   [&Left]^C^C_-view _left
ID_VpointRig   [&Right]^C^C_-view _right
ID_VpointFro   [&Front]^C^C_-view _front
ID_VpointBac   [Bac&k ]^C^C_-view _back
               [--]
ID_VpointSW    [&SW Isometric]^C^C_-view _swiso
ID_VpointSE    [S&E Isometric]^C^C_-view _seiso
ID_VpointNE    [&NE Isometric]^C^C_-view _neiso
ID_VpointNW    [<-N&W Isometric]^C^C_-view _nwiso
ID_3dorbit     [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)3D Or&bit]'_3dorbit
             [--]
ID_Hide      [&Hide]^C^C_hide
ID_MnPersShad   [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)&Shade]
ID_2doptim     [&2D Wireframe]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _2)
ID_Wireframe   [&3D Wireframe]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _3)
ID_Hidden      [&Hidden]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _h)
ID_Flat        [&Flat Shaded]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _f)
ID_Gouraud     [&Gouraud Shaded]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _g)
ID_FlatEdges   [Fla&t Shaded, Edges On]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _l)
ID_GourEdges   [<-Gouraud &Shaded, Edges On]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _o)
ID_MnRender  [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)R&ender]
ID_Render      [&Render...]^C^C_render
               [--]
ID_Scene       [&Scene...]^C^C_scene
ID_Light       [&Light...]^C^C_light
ID_Rmat        [&Materials...]^C^C_rmat
ID_Matlib      [Materials Librar&y...]^C^C_matlib
ID_Setuv       [M&apping...]^C^C_setuv
               [--]
ID_Backgroun   [&Background...]^C^C_background
ID_Fog         [&Fog...]^C^C_fog
ID_Lsnew       [Landscape &New...]^C^C_lsnew
ID_Lsedit      [Landscape &Edit...]^C^C_lsedit
ID_Lslib       [Lands&cape Library...]^C^C_lslib
               [--]
ID_Rpref       [&Preferences...]^C^C_rpref
ID_Stats       [<-S&tatistics...]^C^C_stats
             [--]
ID_MnDisplay [->Disp&lay]
ID_MnUCSicon   [->&UCS Icon]
ID_UcsiconOn     [$(if,$(and,$(getvar,ucsicon),1),!.)&On]$M=$(if,$(and,$(getvar,ucsicon),1),^C^C_ucsicon _off,^C^C_ucsicon _on)
ID_UcsiconOr     [$(if,$(and,$(getvar,ucsicon),2),!.)O&rigin]$M=$(if,$(and,$(getvar,ucsicon),2),^C^C_ucsicon _no,^C^C_ucsicon _or)
ID_UcsiconPr     [<-&Properties...]^C^C_ucsicon _p
ID_MnAttribu   [->&Attribute Display]
ID_AttdispNo     [$(if,$(eq,$(getvar,attmode),1),!.)&Normal]'_attdisp _n
                 [--]
ID_AttdispOn     [$(if,$(eq,$(getvar,attmode),2),!.)&On]'_attdisp _on
ID_AttdispOf     [<-$(if,$(eq,$(getvar,attmode),0),!.)O&ff]'_attdisp _off
               [--]
ID_Textscr     [<-&Text Window\tF2]'_textscr
ID_Toolbar   [T&oolbars...]^C^C_toolbar

***POP4
**INSERT
ID_MnInsert  [&Insert]
ID_Ddinsert  [&Block...]^C^C_insert
ID_Xattach   [E&xternal Reference...]^C^C_xattach
ID_Imageatta [Raster &Image...]^C^C_imageattach
             [--]
ID_MnLayout  [->&Layout]
ID_NewLayout  [&New Layout]^C^C_layout _new
ID_TmplLayou  [Layout from &Template...]^C^C_layout _template
ID_LayoutWiz  [<-Layout &Wizard]^C^C_layoutwizard
             [--]
ID_3dsin     [&3D Studio...]^C^C_3dsin
ID_Acisin    [&ACIS File...]^C^C_acisin
ID_Dxbin     [Drawing &Exchange Binary...]^C^C_dxbin
ID_Wmfin     [&Windows Metafile...]^C^C_wmfin
ID_Insertobj [&OLE Object...]^C^C_insertobj
ID_MARKUP    [Mark&up...]^C^C_rmlin
             [--]
ID_Xref      [X&ref Manager...]^C^C_xref
ID_Image     [I&mage Manager...]^C^C_image
             [--]
ID_Hyperlink [&Hyperlink...\tCtrl+K]^C^C_hyperlink

***POP5
**FORMAT
ID_MnFormat  [F&ormat]
ID_Layer     [&Layer...]'_layer
ID_Ddcolor   [&Color...]'_color
ID_Linetype  [Li&netype...]'_linetype
ID_Linewt    [Line&weight...]'_lweight
             [--]
ID_Style     [Text &Style...]'_style
ID_Ddim      [&Dimension Style...]'_dimstyle
ID_PlotStyle [$(if,$(eq,$(getvar,pstylemode),1),~,)Plot St&yle...]^C^C_plotstyle
ID_Ddptype   [&Point Style...]'_ddptype
ID_Mlstyle   [&Multiline Style...]^C^C_mlstyle
             [--]
ID_Units     [&Units...]'_units
ID_Thickness [&Thickness]'_thickness
ID_Limits    [Dr&awing Limits]'_limits
             [--]
ID_Ddrename  [&Rename...]^C^C_rename

***POP6
**TOOLS
ID_MnTools   [&Tools]
ID_Today     [&Today]^C^C_Today 
ID_PointA    [&Autodesk Point A]^C^C_^C^C_browser http://pointa.autodesk.com
ID_MeetNow   [&Meet Now]^C^C_MeetNow
ID_MnCadStd  [->CAD &Standards]
ID_Standards   [&Configure...]^C^C_standards
ID_CheckStan   [Chec&k...]^C^C_checkstandards
ID_LayTrans    [<-&Layer Translator...]^C^C_laytrans
             [--]

ID_Spell     [Sp&elling]'_spell
ID_Qselect   [Quic&k Select...]^C^C_qselect
ID_MnOrder   [->Display &Order]
ID_DrawordeF   [Bring to &Front]^C^C^P(ai_draworder "_f") ^P
ID_DrawordeB   [Send to &Back]^C^C^P(ai_draworder "_b") ^P
               [--]
ID_DrawordeA   [Bring &Above Object]^C^C^P(ai_draworder "_a") ^P
ID_DrawordeU   [<-Send &Under Object]^C^C^P(ai_draworder "_u") ^P
ID_Inquiry   [->In&quiry]
ID_Dist        [&Distance]'_dist
ID_Area        [&Area]^C^C_area
ID_Massprop    [Region/&Mass Properties]^C^C_massprop
               [--]
ID_List        [&List]^C^C_list
ID_Id          [&ID Point]'_id
               [--]
ID_Time        [&Time]'_time
ID_Status      [&Status]'_status
ID_Setvar      [<-Set &Variable]'_setvar
             [--]
ID_EAttExt     [Attribute E&xtraction...]^C^C_eattext
ID_Modify      [$(if,$(and,$(getvar,opmstate),1),!.)Propert&ies\tCtrl+1]$M=$(if,$(and,$(getvar,opmstate),1),^C^C_propertiesclose,^C^C_properties)
ID_Content     [$(if,$(and,$(getvar,adcstate),1),!.)AutoCAD Desi&gnCenter\tCtrl+2]$M=$(if,$(and,$(getvar,adcstate),1),'_adcclose,'_adcenter)
ID_dbConnect   [$(if,$(and,$(getvar,dbcstate),1),!.)&dbConnect\tCtrl+6]$M=$(if,$(and,$(getvar,dbcstate),1),^C^C_dbcClose,^C^C_dbConnect)
             [--]
ID_Appload   [&Load Application...]^C^C_appload
ID_Script    [&Run Script...]'_script
ID_VBAMacro  [->M&acro]
ID_VBARun      [&Macros...\tAlt+F8]^C^C_vbarun
ID_VBALoad     [&Load Project...]^C^C_vbaload
ID_VBAMan      [&VBA Manager...]^C^C_vbaman
             [--]
ID_VBAIDE      [<-Visual &Basic Editor \tAlt+F11]^C^C_vbaide
ID_AutoLisp  [->AutoLI&SP]
ID_AULPLoad    [&Load...]^C^C_appload
ID_AULPIDE     [<-&Visual LISP Editor]^C^C_vlide
             [--]
ID_MnImage   [->Displa&y Image]
ID_Replay      [&View...]^C^C_replay
ID_Saveimg     [<-&Save...]^C^C_saveimg
             [--]
ID_Dducs       [Named &UCS...]^C^C_+ucsman 0

ID_UcsOrtho   [->Ort&hographic UCS]
ID_Dducsp      [&Preset...]^C^C_+ucsman 1
ID_UcsTop      [&Top]^C^C_ucs _g _t
ID_UcsBottom   [&Bottom]^C^C_ucs _g _b
ID_UcsLeft     [&Left]^C^C_ucs _g _l
ID_UcsRight    [&Right]^C^C_ucs _g _r
ID_UcsFront    [&Front]^C^C_ucs _g _f
ID_UcsBack     [<-Bac&k]^C^C_ucs _g _ba
 
ID_UcsMove     [Mo&ve UCS]^C^C_ucs _move
ID_MnUCS     [->Ne&w UCS]
ID_UcsWorld    [&World]^C^C_ucs _w
ID_UcsObject   [&Object]^C^C_ucs _ob
ID_UcsFace	   [&Face]^C^C_ucs _fa	
ID_UcsView     [&View]^C^C_ucs _v
               [--]
ID_UcsOrigin   [Origi&n]^C^C_ucs _o
ID_UcsZAxVec   [Z &Axis Vector]^C^C_ucs _zaxis
ID_Ucs3point   [&3 Point]^C^C_ucs _3
               [--]
ID_UcsXAxRot   [&X]^C^C_ucs _x
ID_UcsYAxRot   [&Y]^C^C_ucs _y
ID_UcsZAxRot   [&Z]^C^C_ucs _z
             [--]
ID_UcsApply    [<-A&pply]^C^C_ucs _apply
             [--]
ID_Wizard      [->Wi&zards]
ID_Publish       [Publish to &Web...]^C^C_publishtoweb
                 [--]
ID_AddPlotter    [Add &Plotter...]^C^C^P(if(startapp "addplwiz.exe")(princ)) ^P
ID_AddPlStyle    [Add Plot &Style Table....]^C^C^P(if(startapp "styshwiz.exe")(princ)) ^P
ID_PenSetting    [$(if,$(eq,$(getvar,pstylemode),1),Add Color-&Dependent Plot Style Table...,Add &Named Plot Style Table...)]^C^C_r14penwizard
                 [--]
ID_CreateLayout  [&Create Layout...]^C^C_layoutwizard 
ID_ImpPlotSet  [<-&Import Plot Settings...]^C^C_pcinwizard

ID_Ddrmodes  [Dra&fting Settings...]'_dsettings
ID_MnTablet  [->Ta&blet]
ID_TabletOn    [$(if,$(getvar,tabmode),!.)&On]^C^C_tablet _on
ID_TabletOff   [$(if,$(eq,$(getvar,tabmode),0),!.)O&ff]^C^C_tablet _off
               [--]
ID_TabletCal   [&Calibrate]^C^C_tablet _cal
ID_TabletCfg   [<-Co&nfigure]^C^C_tablet _cfg
ID_Customize [->&Customize]
ID_Menuload    [&Menus...]^C^C_menuload
ID_CToolbar    [&Toolbars...]^C^C_+customize 1
ID_CKeyboard   [<-&Keyboard...]^C^C_+customize 3
ID_Preferenc [Optio&ns...]^C^C_options

***POP7
**DRAW
ID_MnDraw    [&Draw]
ID_Line      [&Line]^C^C_line
ID_Ray       [&Ray]^C^C_ray
ID_Xline     [Cons&truction Line]^C^C_xline
ID_Mline     [&Multiline]^C^C_mline
             [--]
ID_Pline     [&Polyline]^C^C_pline
ID_3dpoly    [&3D Polyline]^C^C_3dpoly
ID_Polygon   [Pol&ygon]^C^C_polygon
ID_Rectang   [Rectan&gle]^C^C_rectang
             [--]
ID_MnArc     [->&Arc]
ID_Arc3point   [3 &Points]^C^C_arc
               [--]
ID_ArcStCeEn   [&Start, Center, End]^C^C_arc \_c
ID_ArcStCeAn   [S&tart, Center, Angle]^C^C_arc \_c \_a
ID_ArcStCeLe   [St&art, Center, Length]^C^C_arc \_c \_l
               [--]
ID_ArcStEnAg   [Start, E&nd, Angle]^C^C_arc \_e \_a
ID_ArcStEnDi   [Start, End, &Direction]^C^C_arc \_e \_d
ID_ArcStEnRa   [Start, End, &Radius]^C^C_arc \_e \_r
               [--]
ID_ArcCeStEn   [&Center, Start, End]^C^C_arc _c
ID_ArcCeStAn   [C&enter, Start, Angle]^C^C_arc _c \\_a
ID_ArcCeStLe   [Center, Start, &Length]^C^C_arc _c \\_l
               [--]
ID_ArcContin   [<-C&ontinue]^C^C_arc ;
ID_MnCircle  [->&Circle]
ID_CircleRad   [Center, &Radius]^C^C_circle
ID_CircleDia   [Center, &Diameter]^C^C_circle \_d
               [--]
ID_Circle2pt   [&2 Points]^C^C_circle _2p
ID_Circle3pt   [&3 Points]^C^C_circle _3p
               [--]
ID_CircleTTR   [&Tan, Tan, Radius]^C^C_circle _ttr
ID_CircleTTT   [<-T&an, Tan, Tan]^C^C_circle _3p _tan \_tan \_tan \
ID_Donut     [&Donut]^C^C_donut
ID_Spline    [&Spline]^C^C_spline
ID_MnEllipse [->&Ellipse]
ID_EllipseCe   [&Center]^C^C_ellipse _c
ID_EllipseAx   [Axis, &End]^C^C_ellipse
               [--]
ID_EllipseAr   [<-&Arc]^C^C_ellipse _a
             [--]
ID_MnBlock   [->Bloc&k]
ID_Bmake       [&Make...]^C^C_block
               [--]
ID_Base        [&Base]'_base
ID_Attdef    [<-&Define Attributes...]^C^C_attdef
ID_MnPoint   [->P&oint]
ID_PointSing   [&Single Point]^C^C_point
ID_PointMult   [Multiple &Point]*^C^C_point
               [--]
ID_Divide      [&Divide]^C^C_divide
ID_Measure     [<-&Measure]^C^C_measure
             [--]
ID_Bhatch    [&Hatch...]^C^C_bhatch
ID_Boundary  [&Boundary...]^C^C_boundary
ID_Region    [Regio&n]^C^C_region
             [--]
ID_MnText    [->Te&xt]
ID_Mtext       [&Multiline Text...]^C^C_mtext
ID_Dtext       [<-&Single Line Text]^C^C_dtext
             [--]
ID_MnSurface [->Sur&faces]
ID_Solid       [&2D Solid]^C^C_solid
ID_3dface      [3D &Face]^C^C_3dface
ID_3dsurface   [&3D Surfaces...]$I=ACAD.image_3dobjects $I=ACAD.*
               [--]
ID_Edge        [&Edge]^C^C_edge
ID_3dmesh      [3D &Mesh]^C^C_3dmesh
               [--]
ID_Revsurf     [Revolved &Surface]^C^C_revsurf
ID_Tabsurf     [&Tabulated Surface]^C^C_tabsurf
ID_Rulesurf    [&Ruled Surface]^C^C_rulesurf
ID_Edgesurf    [<-E&dge Surface]^C^C_edgesurf
ID_MnSolids  [->Sol&ids]
ID_Box         [&Box]^C^C_box
ID_Sphere      [&Sphere]^C^C_sphere
ID_Cylinder    [&Cylinder]^C^C_cylinder
ID_Cone        [C&one]^C^C_cone
ID_Wedge       [&Wedge]^C^C_wedge
ID_Torus       [&Torus]^C^C_torus
               [--]
ID_Extrude     [E&xtrude]^C^C_extrude
ID_Revolve     [&Revolve]^C^C_revolve
               [--]
ID_Slice       [S&lice]^C^C_slice
ID_Section     [S&ection]^C^C_section
ID_Interfere   [&Interference]^C^C_interfere
               [--]
ID_MnSetup     [->Set&up]
ID_Soldraw       [&Drawing]^C^C_soldraw
ID_Solview       [&View]^C^C_solview
ID_Solprof       [<-<-&Profile]^C^C_solprof

***POP8
**DIMENSION
ID_MnDimensi [Dime&nsion]
ID_QDim      [&Quick Dimension]^C^C_qdim
             [--]
ID_Dimlinear [&Linear]^C^C_dimlinear
ID_Dimaligne [Ali&gned]^C^C_dimaligned
ID_Dimordina [&Ordinate]^C^C_dimordinate
             [--]
ID_Dimradius [&Radius]^C^C_dimradius
ID_Dimdiamet [&Diameter]^C^C_dimdiameter
ID_Dimangula [&Angular]^C^C_dimangular
             [--]
ID_Dimbaseli [&Baseline]^C^C_dimbaseline
ID_Dimcontin [&Continue]^C^C_dimcontinue
             [--]
ID_Leader    [L&eader]^C^C_qleader
ID_Tolerance [&Tolerance...]^C^C_tolerance
ID_Dimcenter [Center &Mark]^C^C_dimcenter
             [--]
ID_Dimedito   [Obli&que]^C^C_dimedit _o
ID_MnAlign   [->Align Te&xt]
ID_DimteditH   [&Home]^C^C_dimedit _h
ID_DimteditA   [&Angle]^C^C_dimtedit \_a
               [--]
ID_DimteditL   [&Left]^C^C_dimtedit \_l
ID_DimteditC   [&Center]^C^C_dimtedit \_c
ID_DimteditR   [<-&Right]^C^C_dimtedit \_r
             [--]
ID_Ddim      [&Style...]'_dimstyle
ID_Dimoverri [O&verride]^C^C_dimoverride
ID_DimstyleA [&Update]^C^C_-dimstyle _apply
ID_Dimreasso [Reassociate Dime&nsions]^C^C_dimreassociate

***POP9
**MODIFY
ID_MnModify  [&Modify]
ID_Ai_propch [&Properties]^C^C_properties
ID_Matchprop [&Match Properties]'_matchprop
ID_MnObject  [->&Object]
ID_MnExterna   [->&External Reference]
ID_Xbind         [&Bind...]^C^C_xbind
ID_Xclipfram     [<-$(if,$(eq,$(getvar,xclipframe),1),!.)&Frame]$M=$(if,$(eq,$(getvar,xclipframe),1),^C^C_xclipframe 0,^C^C_xclipframe 1)
ID_MnImage     [->&Image]
ID_Imageadju     [&Adjust...]^C^C_imageadjust
ID_Imagequal     [&Quality]^C^C_imagequality
ID_Transpare     [&Transparency]^C^C_transparency
                 [--]
ID_Imagefram     [<-&Frame]^C^C_imageframe
               [--]
ID_Hatchedit   [&Hatch...]^C^C_hatchedit
ID_Pedit       [&Polyline]^C^C_pedit
ID_Splinedit   [&Spline]^C^C_splinedit
ID_Mledit      [&Multiline...]^C^C_mledit
ID_MnAttribu   [->&Attribute]
ID_EAttEdit      [&Single...]^C^C_eattedit
ID_AtteditGlo    [&Global]^C^C_-attedit
ID_BattMan       [<-&Block Attribute Manager...]^C^C_battman
ID_Blockdsc    [&Block Description...]^C^C_block
ID_MnText      [->&Text]
ID_Ddedit        [&Edit...]^C^C_ddedit
ID_Scaletext     [&Scale]^C^C_scaletext
ID_Justifyte     [<-<-&Justify]^C^C_justifytext
ID_Clip      [->&Clip]
ID_ImageClip   [&Image]^C^C_imageclip
ID_XrefClip    [&Xref]^C^C_xclip
ID_VportClip   [<-&Viewport]^C^C_vpclip
               [--]
ID_Refedit   [->In-place Xref and &Block Edit]
ID_RefEditor   [&Edit Reference]^C^C_refedit;
ID_RefAdd      [$(if,$(eq,$(getvar,refeditname),""),~,)&Add to Working set]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert);^P,+
$(if,$(and,$(=,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),^C^C_refset;,^C^C_refset _add;))^Z
ID_RefRemove   [$(if,$(eq,$(getvar,refeditname),""),~,)&Remove from Working set]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert);^P,+
$(if,$(and,$(=,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),^C^C_refset;,^C^C_refset _rem;))^Z
ID_RefSave     [$(if,$(eq,$(getvar,refeditname),""),~,)&Save Reference Edits]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert)^P,^C^C_refclose _sav)
ID_RefDscrd    [<-$(if,$(eq,$(getvar,refeditname),""),~,)&Discard Reference Edits]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert)^P,^C^C_refclose _disc)
             [--]
ID_Erase     [&Erase]^C^C_erase
ID_Copy      [Cop&y]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_copy,^C^C_copy)
ID_Mirror    [M&irror]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_mirror,^C^C_mirror)
ID_Offset    [Off&set]^C^C_offset
ID_Array     [&Array...]^C^C_array
             [--]
ID_Move      [Mo&ve]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_move,^C^C_move)
ID_Rotate    [&Rotate]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_rotate,^C^C_rotate)
ID_Scale     [Sca&le]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_scale,^C^C_scale)
ID_Stretch   [Stretc&h]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_stretch,^C^C_stretch)
ID_Lengthen  [Len&gthen]^C^C_lengthen
             [--]
ID_Trim      [&Trim]^C^C_trim
ID_Extend    [Exten&d]^C^C_extend
ID_Break     [Brea&k]^C^C_break
ID_Chamfer   [&Chamfer]^C^C_chamfer
ID_Fillet    [&Fillet]^C^C_fillet
             [--]
ID_Mn3dopera [->&3D Operation]
ID_3darray     [&3D Array]^C^C_3darray
ID_Mirror3d    [&Mirror 3D]^C^C_mirror3d
ID_Rotate3d    [&Rotate 3D]^C^C_rotate3d
               [--]
ID_Align       [<-A&lign]^C^C_align
ID_SolidsEdi [->Solids Editi&ng]
ID_Union       [&Union]^C^C_union
ID_Subtract    [&Subtract]^C^C_subtract
ID_Intersect   [&Intersect]^C^C_intersect
             [--]
ID_FaceExtru   [&Extrude faces]^C^C_solidedit _face _extrude
ID_FaceMove    [&Move faces]^C^C_solidedit _face _move
ID_FaceOffse   [&Offset faces]^C^C_solidedit _face _offset
ID_FaceDel     [&Delete faces]^C^C_solidedit _face _delete
ID_FaceRotat   [Rot&ate faces]^C^C_solidedit _face _rotate
ID_FaceTaper   [&Taper faces]^C^C_solidedit _face _taper
ID_FaceColor   [&Color faces]^C^C_solidedit _face _color
ID_FaceCopy    [Copy &faces]^C^C_solidedit _face _copy
             [--]
ID_EdgeColor   [Co&lor edges]^C^C_solidedit _edge _color
ID_EdgeCopy    [Copy ed&ges]^C^C_solidedit _edge _copy
             [--]
ID_Imprint     [&Imprint]^C^C_solidedit _body _imprint
ID_BodyCln     [Clea&n]^C^C_solidedit _body _clean
ID_Separate    [&Separate]^C^C_solidedit _body _separate
ID_Shell       [S&hell]^C^C_solidedit _body _shell
ID_BodyChk     [<-Chec&k]^C^C_solidedit _body _check
             [--]
ID_Explode   [E&xplode]^C^C_explode

***POP10
**WINDOW
ID_MnWindow  [&Window]
ID_DWG_CLOSE	     [Cl&ose]^C^C_close
ID_WINDOW_CLOSEALL   [C&lose All]^C^C_closeall
                     [--]
ID_WINDOW_CASCADE    [&Cascade]^C^C_syswindows;_cascade
ID_WINDOW_TILE_HORZ  [Tile &Horizontally]^C^C_syswindows;_hor
ID_WINDOW_TILE_VERT  [&Tile Vertically]^C^C_syswindows;_vert
ID_WINDOW_ARRANGE    [&Arrange Icons]^C^C_syswindows;_arrange

***POP11
**HELP
ID_MnHelp    [&Help]
ID_Help      [&Help\tF1]'_help
ID_ASSIST    [&Active Assistance]'_ASSIST
ID_DevHelp   [&Developer Help]^C^C^P(help "acad_dev" "") ^P
ID_Support   [&Support Assistance]^C^C^P(help "acad" "asa") ^P 
ID_ProdSupp  [&Product Support on Point A]^C^C^Pai_product_support ^P
             [--]
ID_WhatsNew  [&What's New]^C^C^P(progn (help "acadwnew")(princ)) ^P 
ID_LAssist   [&Learning Assistance]^C^C^P(if (findfile "alalink.exe") (progn (princ)(startapp "alalink.exe") (princ)) (la_support_assistance_alert)) ^P
ID_AUGI      [Autodesk &User Group International]^C^C^P(command "_browser" (findfile "augi.htm")) ^P
             [--]
ID_BuyOnline [&Buy Online]^C^C_buyonline
             [--]            
ID_About     [Ab&out]'_about

// POP menus with a primary alias of POP500 and above do not appear in the customize
// menu list of menus that can be inserted into the main menu bar. All context
// menus should have primary aliases of POP500 and above.

***POP500
**GRIPS
//  When a grip is hot, then display the following shortcut menu for grips.  See also AUX1 menu.
             [&Grips Cursor Menu]
ID_Enter     [&Enter];
             [--]
ID_GripMove  [&Move]_move
ID_GripMirro [M&irror]_mirror
ID_GripRotat [&Rotate]_rotate
ID_GripScale [Sca&le]_scale
ID_GripStret [&Stretch]_stretch
             [--]
ID_GripBase  [&Base Point]_base
ID_GripCopy  [&Copy]_copy
ID_GripRefer [$(if,$(or,$(eq,$(getvar,cmdnames),GRIP_SCALE),$(eq,$(getvar,cmdnames),GRIP_ROTATE)),,~)Re&ference]_reference
ID_GripUndo  [&Undo]_u
             [--]
ID_Modify  [&Properties]^C^C_properties
ID_GotoURL   [&Go to URL...]^C^C_gotourl
             [--]
ID_GripExit  [E&xit]_exit

***POP501
**CMDEFAULT
             [Context menu for default mode]
ID_CMNonLast [&Repeat %s]^C^C;
             [--]
ID_Cutclip   [Cu&t]^C^C_cutclip
ID_Copyclip  [&Copy]^C^C_copyclip
ID_Copybase  [Copy with &Base Point]^C^C_copybase
ID_Pasteclip [&Paste]^C^C_pasteclip
ID_Pastebloc [Paste as Bloc&k]^C^C_pasteblock
ID_Pasteorig [Paste to Original Coor&dinates]^C^C_pasteorig
             [--]
ID_U         [&Undo]^C^C_u
ID_Redo      [Re&do]^C^C_redo
ID_Pan	     [P&an]'_pan
ID_ZoomRealt [&Zoom]'_zoom ;
             [--]
ID_Filter    [&Quick Select...]^C^C_qselect
ID_TextFind  [&Find...]^C^C_find
ID_Preferenc [&Options...]^C^C_options

***POP502
**CMEDIT
             [Context menu for edit mode]
ID_CMSelLast [&Repeat %s]^C^C;
             [--]
ID_Cutclip   [Cu&t]^C^C_cutclip
ID_Copyclip  [&Copy]^C^C_copyclip
ID_Copybase  [Copy with &Base Point]^C^C_copybase
ID_Pasteclip [&Paste]^C^C_pasteclip
ID_Pastebloc [Paste as Bloc&k]^C^C_pasteblock
ID_Pasteorig [Paste to Original Coor&dinates]^C^C_pasteorig
             [--]
ID_Erase     [&Erase]^C^C_erase
ID_Move      [&Move]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_move,^C^C_move)
ID_Copy      [Cop&y Selection]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_copy,^C^C_copy)
ID_Scale     [Sca&le]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_scale,^C^C_scale)
ID_Rotate    [R&otate]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_rotate,^C^C_rotate)

             [--]
ID_Deselectall [Deselect &All]^C^C^P(ai_deselect) ^P
             [--]
ID_Filter    [&Quick Select...]^C^C_qselect
ID_TextFind  [&Find...]^C^C_find
ID_Ai_propch [Propertie&s]^C^C_properties

***POP503
**CMCOMMAND
             [Context menu for command mode]
ID_Enter     [&Enter];
ID_Cancel    [&Cancel]^C
             [--]
ID_Pan	     [$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),ZOOM),~,)&Pan]'_pan
ID_ZoomRealt [$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),ZOOM),~,)&Zoom]'_zoom ;

***POP504
**OBJECTS_DIMENSION
                [Context Menu for Dimension Objects]
ID_DimText      [->Dim Te&xt position]
ID_DimAbove     [&Above dim line]^C^C_ai_dim_textabove
ID_DimTxtCen    [&Centered]^C^C_ai_dim_textcenter
ID_DimHome      [&Home text]^C^C_ai_dim_texthome
ID_DimTxtMove2  [&Move text alone]^C^C_aidimtextmove _2
ID_DimTxtMove1  [Move with &leader]^C^C_aidimtextmove _1
ID_DimTxtMove0  [<-Move with &dim line]^C^C_aidimtextmove _0
ID_DimPrec      [->P&recision]
ID_DimPrec0      [0]^C^C_aidimprec _0
ID_DimPrec1      [0.0]^C^C_aidimprec _1
ID_DimPrec2      [0.00]^C^C_aidimprec _2
ID_DimPrec3      [0.000]^C^C_aidimprec _3
ID_DimPrec4      [0.0000]^C^C_aidimprec _4
ID_DimPrec5      [0.00000]^C^C_aidimprec _5
ID_DimPrec6      [<-0.000000]^C^C_aidimprec _6
ID_DimSty1     [->&Dim Style]
ID_DimSty2        [&Save as New Style...]^C^C_aidimstyle _S
                  [--]
ID_DimSty3        [Dim Style MRU1]^C^C_aidimstyle _1
ID_DimSty4        [Dim Style MRU2]^C^C_aidimstyle _2
ID_DimSty5        [Dim Style MRU3]^C^C_aidimstyle _3
ID_DimSty6        [Dim Style MRU4]^C^C_aidimstyle _4
ID_DimSty7        [Dim Style MRU5]^C^C_aidimstyle _5
ID_DimSty8        [Dim Style MRU6]^C^C_aidimstyle _6
ID_DimSty9        [<-&Other...]^C^C_aidimstyle _O

***POP505
**OBJECT_VIEWPORT
                 [Context menu for Viewport Object]
ID_VpClip        [&Viewport Clip]^C^C_vpclip
ID_Vport_disp    [->&Display Viewport Objects]
ID_Vport_dispon  [&Yes]^C^C_-vports _on _p;;
ID_Vport_dispoff [<-&No]^C^C_-vports _off _p;;
ID_Vport_lock    [->Display &Locked]
ID_Vport_lockon  [&Yes]^C^C_-vports _lock _on _p;;
ID_Vport_lockoff [<-&No]^C^C_-vports _lock _off _p;;
ID_Vport_hide    [->&Hide Plot]
ID_Vport_hideon  [&Yes]^C^C_-vports _hide _on _p;;
ID_Vport_hideoff [<-&No]^C^C_-vports _hide _off _p;;

***POP506
**OBJECTS_XREF
                [Context menu for XREF Objects]
ID_Xclip        [Xref Cl&ip]^C^C_xclip
ID_XRef         [Xref Ma&nager...]^C^C_xref

***POP507
**OBJECT_MTEXT
				[Context menu for MTEXT Object]
ID_Mtedit		[Mtext Ed&it...]^C^C_mtedit

***POP508
**OBJECT_TEXT
				[Context menu for TEXT object]
ID_Ddedit		[Text Ed&it...]^C^C_ddedit

***POP509
**OBJECT_HATCH
				[Context menu for HATCH object]
ID_Hatchedit	[&Hatch Edit...]^C^C_hatchedit

***POP510
**OBJECT_LWPOLYLINE
				[Context menu for PLINE object]
ID_Pedit		[Polyline Ed&it]^C^C_pedit

***POP511
**OBJECT_SPLINE
				[Context menu for SPLINE object]
ID_Splinedit	[Spline Ed&it]^C^C_splinedit

***POP512
**OBJECT_POLYLINE
				[Context menu for PLINE object]
ID_Pedit		[Polyline Ed&it]^C^C_pedit

//
//   Begin AutoCAD ToolBars
//

***TOOLBARS

**TB_DIMENSION
ID_TbDimensi [_Toolbar("Dimension", _Floating, _Hide, 100, 130, 1)]
ID_Dimlinear [_Button("Linear Dimension", ICON_16_DIMLIN, ICON_16_DIMLIN)]^C^C_dimlinear
ID_Dimaligne [_Button("Aligned Dimension", ICON_16_DIMALI, ICON_16_DIMALI)]^C^C_dimaligned
ID_Dimordina [_Button("Ordinate Dimension", ICON_16_DIMORD, ICON_16_DIMORD)]^C^C_dimordinate
             [--]
ID_Dimradius [_Button("Radius Dimension", ICON_16_DIMRAD, ICON_16_DIMRAD)]^C^C_dimradius
ID_Dimdiamet [_Button("Diameter Dimension", ICON_16_DIMDIA, ICON_16_DIMDIA)]^C^C_dimdiameter
ID_Dimangula [_Button("Angular Dimension", ICON_16_DIMANG, ICON_16_DIMANG)]^C^C_dimangular
             [--]
ID_QDim      [_Button("Quick Dimension", ICON_16_QDIM, ICON_16_QDIM)]^C^C_qdim                          
ID_Dimbaseli [_Button("Baseline Dimension", ICON_16_DIMBAS, ICON_16_DIMBAS)]^C^C_dimbaseline
ID_Dimcontin [_Button("Continue Dimension", ICON_16_DIMCON, ICON_16_DIMCON)]^C^C_dimcontinue
             [--]
ID_Leader    [_Button("Quick Leader", ICON_16_QLEADER, ICON_16_QLEADER)]^C^C_qleader                          
ID_Tolerance [_Button("Tolerance", ICON_16_TOLERA, ICON_16_TOLERA)]^C^C_tolerance
ID_Dimcenter [_Button("Center Mark", ICON_16_DIMCEN, ICON_16_DIMCEN)]^C^C_dimcenter
             [--]
ID_Dimedit   [_Button("Dimension Edit", ICON_16_DIMNEW, ICON_16_DIMNEW)]^C^C_dimedit
ID_Dimtedit  [_Button("Dimension Text Edit", ICON_16_DIMRED, ICON_16_DIMRED)]^C^C_dimtedit
ID_DimUpdate [_Button("Dimension Update", ICON_16_DIMUPD, ICON_16_DIMUPD)]^C^C_-dimstyle _apply
             [--]
ID_DimStyle  [_Control(_dimstyle)]
ID_Ddim      [_Button("Dimension Style", ICON_16_DIMSTY, ICON_16_DIMSTY)]'_dimstyle

**TB_DRAW
ID_TbDraw    [_Toolbar("Draw", _Left, _Show, 0, 0, 1)]
ID_Line      [_Button("Line", ICON_16_LINE, ICON_16_LINE)]^C^C_line
ID_Xline     [_Button("Construction Line", ICON_16_XLINE, ICON_16_XLINE)]^C^C_xline
ID_Mline     [_Button("Multiline", ICON_16_MLINE, ICON_16_MLINE)]^C^C_mline
ID_Pline     [_Button("Polyline", ICON_16_PLINE, ICON_16_PLINE)]^C^C_pline
ID_Polygon   [_Button("Polygon", ICON_16_POLYGO, ICON_16_POLYGO)]^C^C_polygon
ID_Rectang   [_Button("Rectangle", ICON_16_RECTAN, ICON_16_RECTAN)]^C^C_rectang
ID_Arc       [_Button("Arc", ICON_16_ARC3PT, ICON_16_ARC3PT)]^C^C_arc
ID_Circle    [_Button("Circle", ICON_16_CIRRAD, ICON_16_CIRRAD)]^C^C_circle
ID_Spline    [_Button("Spline", ICON_16_SPLINE, ICON_16_SPLINE)]^C^C_spline
ID_Ellipse   [_Button("Ellipse", ICON_16_ELLAE, ICON_16_ELLAE)]^C^C_ellipse
ID_EllipseAr [_Button("Ellipse Arc", ICON_16_ELLARC, ICON_16_ELLARC]^C^C_ellipse _a
ID_TbInsert  [_Flyout("Block", ICON_16_BLOCK, ICON_16_BLOCK, _OtherIcon, ACAD.TB_INSERT)]
ID_Bmake     [_Button("Make Block", ICON_16_BLOCK, ICON_16_BLOCK)]^C^C_block
ID_Point     [_Button("Point", ICON_16_POINT, ICON_16_POINT)]*^C^C_point
ID_Bhatch    [_Button("Hatch", ICON_16_BHATCH, ICON_16_BHATCH)]^C^C_bhatch
ID_Region    [_Button("Region", ICON_16_REGION, ICON_16_REGION)]^C^C_region
ID_Mtext     [_Button("Multiline Text", ICON_16_MTEXT, ICON_16_MTEXT)]^C^C_mtext

**TB_INQUIRY
ID_TbInquiry [_Toolbar("Inquiry", _Floating, _Hide, 100, 170, 1)]
ID_Dist      [_Button("Distance", ICON_16_DIST, ICON_16_DIST)]'_dist
ID_Area      [_Button("Area", ICON_16_AREA, ICON_16_AREA)]^C^C_area
ID_Massprop  [_Button("Region/Mass Properties", ICON_16_MASSPR, ICON_16_MASSPR)]^C^C_massprop
             [--]
ID_List      [_Button("List", ICON_16_LIST, ICON_16_LIST)]^C^C_list
ID_Id        [_Button("Locate Point", ICON_16_ID, ICON_16_ID)]'_id

**TB_INSERT
ID_TbInsert  [_Toolbar("Insert", _Floating, _Hide, 100, 190, 1)]
ID_Ddinsert  [_Button("Insert Block", ICON_16_DINSER, ICON_16_DINSER)]^C^C_insert
             [--]
ID_Xref      [_Button("External Reference", ICON_16_XREATT, ICON_16_XREATT)]^C^C_xref
ID_Image     [_Button("Image", ICON_16_IMAGE, ICON_16_IMAGE)]^C^C_image
             [--]
ID_Import    [_Button("Import", ICON_16_IMPORT, ICON_16_IMPORT)]^C^C_import
             [--]
ID_Insertobj [_Button("OLE Object", ICON_16_INSOLE, ICON_16_INSOLE)]^C^C_insertobj

**TB_LAYOUTS
ID_TbLayouts [_Toolbar("Layouts", _Floating, _Hide, 100, 350, 1)]
ID_LayNew    [_Button("New Layout", ICON_16_LAYNEW, ICON_16_LAYNEW)]^C^C_layout _n
ID_LayTemp	 [_Button("Layout from Template", ICON_16_LAYTEM, ICON_16_LAYTEM)]^C^C_layout _t
ID_PlotSetup [_Button("Page Setup", ICON_16_PLTSET, ICON_16_PLTSET)]^C^C_pagesetup
ID_VpDialog  [_Button("Display Viewports Dialog", ICON_16_VPDLG, ICON_16_VPDLG)]^C^C_vports


**TB_MODIFY
ID_TbModify  [_Toolbar("Modify", _Left, _Show, 1, 0, 1)]
ID_Erase     [_Button("Erase", ICON_16_ERASE, ICON_16_ERASE)]^C^C_erase
ID_Copy      [_Button("Copy Object", ICON_16_COPYOB, ICON_16_COPYOB)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_copy,^C^C_copy)
ID_Mirror    [_Button("Mirror", ICON_16_MIRROR, ICON_16_MIRROR)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_mirror,^C^C_mirror)
ID_Offset    [_Button("Offset", ICON_16_OFFSET, ICON_16_OFFSET)]^C^C_offset
ID_Array     [_Button("Array", ICON_16_ARRREC, ICON_16_ARRREC)]^C^C_array
ID_Move      [_Button("Move", ICON_16_MOVE, ICON_16_MOVE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_move,^C^C_move)
ID_Rotate    [_Button("Rotate", ICON_16_ROTATE, ICON_16_ROTATE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_rotate,^C^C_rotate)
ID_Scale     [_Button("Scale", ICON_16_SCALE, ICON_16_SCALE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_scale,^C^C_scale)
ID_Stretch   [_Button("Stretch", ICON_16_STRETC, ICON_16_STRETC)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),GRIP),_stretch,^C^C_stretch)
ID_Lengthen  [_Button("Lengthen", ICON_16_LENGTH, ICON_16_LENGTH)]^C^C_lengthen
ID_Trim      [_Button("Trim", ICON_16_TRIM, ICON_16_TRIM)]^C^C_trim
ID_Extend    [_Button("Extend", ICON_16_EXTEND, ICON_16_EXTEND)]^C^C_extend
ID_BreakSele [_Button("Break at Point", ICON_16_BREAKATPT, ICON_16_BREAKATPT)]^C^C_break \f \@
ID_Break     [_Button("Break", ICON_16_BRE2PT, ICON_16_BRE2PT)]^C^C_break
ID_Chamfer   [_Button("Chamfer", ICON_16_CHAMFE, ICON_16_CHAMFE)]^C^C_chamfer
ID_Fillet    [_Button("Fillet", ICON_16_FILLET, ICON_16_FILLET)]^C^C_fillet
ID_Explode   [_Button("Explode", ICON_16_EXPLOD, ICON_16_EXPLOD)]^C^C_explode

**TB_MODIFY_II
ID_TbModifII [_Toolbar("Modify II", _Floating, _Hide, 100, 270, 1)]
ID_Draworder [_Button("Draworder",ICON_16_DRWORD,ICON_16_DRWORD)]^C^C_draworder
             [--]
ID_Hatchedit [_Button("Edit Hatch", ICON_16_HATEDI, ICON_16_HATEDI)]^C^C_hatchedit
ID_Pedit     [_Button("Edit Polyline", ICON_16_PEDIT, ICON_16_PEDIT)]^C^C_pedit
ID_Splinedit [_Button("Edit Spline", ICON_16_SPLEDI, ICON_16_SPLEDI)]^C^C_splinedit
ID_Mledit    [_Button("Edit Multiline", ICON_16_MLEDIT, ICON_16_MLEDIT)]^C^C_mledit
             [--]
ID_EAttEdit  [_Button("Edit Attribute", ICON_16_ATTEDI, ICON_16_ATTEDI)]^C^C_eattedit
ID_BattMan   [_Button("Block Attribute Manager", ICON_16_BATTMAN, ICON_16_BATTMAN)]^C^C_BattMan
ID_AttSync   [_Button("Synchronize Attributes", ICON_16_ATTSYNC, ICON_16_ATTSYNC)]^C^C_AttSync
ID_EAttExt   [_Button("Attribute Extract", ICON_16_EATTEXT, ICON_16_EATTEXT)]^C^C_EAttExt

**TB_OBJECT_PROPERTIES
ID_TbObjectP [_Toolbar("Object Properties", _Top, _Show, 0, 1, 1)]
ID_Ai_molc   [_Button("Make Object's Layer Current", ICON_16_MOLC, ICON_16_MOLC)]^C^C_ai_molc
ID_Layer     [_Button("Layers", ICON_16_LAYERS, ICON_16_LAYERS)]'_layer
//             [--]
ID_CtrlLayer [_Control(_Layer)]
ID_LayerP    [_Button("Layer Previous", ICON_16_LAYERP, ICON_16_LAYERP)]^C^C_LayerP
             [--]
ID_CtrlColor [_Control(_Color)]
             [--]
ID_CtrlLinet [_Control(_Linetype)]
             [--]
ID_CtrlLineW [_Control(_Lineweight)]
             [--]
ID_CtrlPStyl [_Control(_PlotStyle)]

**TB_OBJECT_SNAP
ID_TbOsnap   [_Toolbar("Object Snap", _Floating, _Hide, 100, 210, 1)]
ID_Tracking  [_Button("Temporary Tracking Point", ICON_16_OSNTMP, ICON_16_OSNTMP)]_tt
ID_From      [_Button("Snap From", ICON_16_OSNFRO, ICON_16_OSNFRO)]_from
             [--]
ID_OsnapEndp [_Button("Snap to Endpoint", ICON_16_OSNEND, ICON_16_OSNEND)]_endp
ID_OsnapMidp [_Button("Snap to Midpoint", ICON_16_OSNMID, ICON_16_OSNMID)]_mid
ID_OsnapInte [_Button("Snap to Intersection", ICON_16_OSNINT, ICON_16_OSNINT)]_int
ID_OsnapAppa [_Button("Snap to Apparent Intersect", ICON_16_OSNAPP, ICON_16_OSNAPP)]_appint
ID_OsnapExte [_Button("Snap to Extension", ICON_16_OSNEXT, ICON_16_OSNEXT)]_ext
             [--]
ID_OsnapCent [_Button("Snap to Center", ICON_16_OSNCEN, ICON_16_OSNCEN)]_cen
ID_OsnapQuad [_Button("Snap to Quadrant", ICON_16_OSNQUA, ICON_16_OSNQUA)]_qua
ID_OsnapTang [_Button("Snap to Tangent", ICON_16_OSNTAN, ICON_16_OSNTAN)]_tan
             [--]
ID_OsnapPerp [_Button("Snap to Perpendicular", ICON_16_OSNPER, ICON_16_OSNPER)]_per
ID_OsnapPara [_Button("Snap to Parallel", ICON_16_OSNPAR, ICON_16_OSNPAR)]_par
ID_OsnapInse [_Button("Snap to Insert", ICON_16_OSNINS, ICON_16_OSNINS)]_ins
ID_OsnapNode [_Button("Snap to Node", ICON_16_OSNNOD, ICON_16_OSNNOD)]_nod
             [--]
ID_OsnapNear [_Button("Snap to Nearest", ICON_16_OSNNEA, ICON_16_OSNNEA)]_nea
ID_OsnapNone [_Button("Snap to None", ICON_16_OSNNON, ICON_16_OSNNON)]_non
             [--]
ID_Osnap     [_Button("Object Snap Settings", ICON_16_OSNAP, ICON_16_OSNAP)]'_+dsettings 2

**TB_ORBIT
ID_TbOrbit   [_Toolbar("3D Orbit", _Floating, _Hide, 100, 350, 1)]
ID_3dpan     [_Button("3D Pan", ICON_16_3DPAN, ICON_16_3DPAN)]'_3dpan
ID_3dzoom    [_Button("3D Zoom", ICON_16_3DZOOM, ICON_16_3DZOOM)]'_3dzoom
ID_3dorbit   [_Button("3D Orbit", ICON_16_3DORBIT, ICON_16_3DORBIT)]'_3dorbit
ID_3dcorbit  [_Button("3D Continuous Orbit", ICON_16_3DCORBIT, ICON_16_3DCORBIT)]'_3dcorbit
ID_3dswivel  [_Button("3D Swivel", ICON_16_3DSWIVEL, ICON_16_3DSWIVEL)]'_3dswivel
ID_3ddistanc [_Button("3D Adjust Distance", ICON_16_3DDISTANCE, ICON_16_3DDISTANCE)]'_3ddistance
ID_3dclip    [_Button("3D Adjust Clip Planes", ICON_16_3DCLIP, ICON_16_3DCLIP)]'_3dclip
ID_3dclipfr  [_Button("Front Clip On/Off", ICON_16_3DCLIPFR, ICON_16_3DCLIPFR)]^C^C_dview _all  _cl$M=$(if,$(and,$(getvar,viewmode),2),$(if,$(and,$(getvar,viewmode),4), _off _cl _b _on^M^M, _off^M^M), _f $(getvar,frontz)^M^M)^Z
ID_3dclipbk  [_Button("Back Clip On/Off", ICON_16_3DCLIPBK, ICON_16_3DCLIPBK)]^C^C_dview _all  _cl _b$M=$(if,$(and,$(getvar,viewmode),4), _off^M^M, _on^M^M)^Z
             [--]
ID_3dviews   [_Control(_View)]

**TB_SHADING
ID_TbShading [_Toolbar("Shade", _Floating, _Hide, 100, 390, 1)]			
ID_2doptim   [_Button("2D Wireframe", ICON_16_2DOPTIM, ICON_16_2DOPTIM)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _2)
ID_Wireframe [_Button("3D Wireframe", ICON_16_WIREFRAME, ICON_16_WIREFRAME)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _3)
ID_Hidden    [_Button("Hidden", ICON_16_HIDDEN, ICON_16_HIDDEN)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _h)
ID_Flat      [_Button("Flat Shaded", ICON_16_FLAT, ICON_16_FLAT)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _f)
ID_Gouraud   [_Button("Gouraud Shaded", ICON_16_GOURAUD, ICON_16_GOURAUD)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _g)
ID_FlatEdges [_Button("Flat Shaded, Edges On", ICON_16_FLATEDGES, ICON_16_FLATEDGES)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _l)
ID_GourEdges [_Button("Gouraud Shaded, Edges On", ICON_16_GOUREDGES, ICON_16_GOUREDGES)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _o)

**TB_REFEDIT
ID_TbRefedit [_Toolbar("Refedit", _Floating, _Hide, 100, 170, 1)]
ID_RefEditor [_Button("Edit block or Xref", ICON_16_REFED_EDIT, ICON_16_REFED_EDIT)]^C^C_refedit;
             [--]
             [_Control(_Refblkname)]
             [--]
ID_RefAdd    [_Button("Add objects to working set", ICON_16_REFED_ADD, ICON_16_REFED_ADD)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert);^P,+
$(if,$(and,$(=,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),^C^C_refset;,^C^C_refset _add;))^Z
ID_RefRemove [_Button("Remove objects from working set", ICON_16_REFED_RMV, ICON_16_REFED_RMV)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert);^P,+
$(if,$(and,$(=,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),^C^C_refset;,^C^C_refset _rem;))^Z
ID_RefDscrd  [_Button("Discard changes to reference", ICON_16_REFED_DISC, ICON_16_REFED_DISC)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert)^P,^C^C_refclose _disc)
ID_RefSave   [_Button("Save back changes to reference", ICON_16_REFED_SAVE, ICON_16_REFED_SAVE)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert)^P,^C^C_refclose _sav)

**TB_REFERENCE
ID_TbReferen [_Toolbar("Reference", _Floating, _Hide, 100, 370, 1)]
ID_Xref      [_Button("External Reference", ICON_16_XREATT, ICON_16_XREATT)]^C^C_xref
ID_Xattach   [_Button("External Reference Attach", ICON_16_XATTAC, ICON_16_XATTAC)]^C^C_xattach
ID_Xclip     [_Button("External Reference Clip",ICON_16_XRECLI,ICON_16_XRECLI)]^C^C_xclip
ID_Xbind     [_Button("External Reference Bind",ICON_16_XBIND,ICON_16_XBIND)]^C^C_xbind
ID_Xclipfram [_Button("External Reference Clip Frame",ICON_16_XCLIPFRAME,ICON_16_XCLIPFRAME)]$M=$(if,$(eq,$(getvar,xclipframe),1),^C^C_xclipframe 0,^C^C_xclipframe 1)
             [--]
ID_Image     [_Button("Image", ICON_16_IMAGE, ICON_16_IMAGE)]^C^C_image
ID_ImageAtta [_Button("Image Attach", ICON_16_IMGATT, ICON_16_IMGATT)]^C^C_imageattach
ID_Imageclip [_Button("Image Clip",ICON_16_IMGCLP, ICON_16_IMGCLP)]^C^C_imageclip
ID_Imageadju [_Button("Image Adjust",ICON_16_IMGADJ, ICON_16_IMGADJ)]^C^C_imageadjust
ID_Imagequal [_Button("Image Quality",ICON_16_IMGQUA, ICON_16_IMGQUA)]^C^C_imagequality
ID_Transpare [_Button("Image Transparency",ICON_16_TRANSP, ICON_16_TRANSP)]^C^C_transparency
ID_Imagefram [_Button("Image Frame",ICON_16_IMGFRAME, ICON_16_IMGFRAME)]^C^C_imageframe

**TB_RENDER
ID_TbRender  [_Toolbar("Render", _Floating, _Hide, 100, 230, 1)]
ID_Hide      [_Button("Hide", ICON_16_HIDE, ICON_16_HIDE)]^C^C_hide
             [--]
ID_Render    [_Button("Render", ICON_16_RENDER, ICON_16_RENDER)]^C^C_render
             [--]
ID_Scene     [_Button("Scenes", ICON_16_SCENE, ICON_16_SCENE)]^C^C_scene
ID_Light     [_Button("Lights", ICON_16_LIGHT, ICON_16_LIGHT)]^C^C_light
ID_Rmat      [_Button("Materials", ICON_16_RMAT, ICON_16_RMAT)]^C^C_rmat
ID_Matlib    [_Button("Materials Library", ICON_16_MATLIB, ICON_16_MATLIB)]^C^C_matlib
ID_Setuv     [_Button("Mapping", ICON_16_SETUV, ICON_16_SETUV)]^C^C_setuv
             [--]
ID_Backgroun [_Button("Background", ICON_16_BACKGR, ICON_16_BACKGR)]^C^C_background
ID_Fog       [_Button("Fog", ICON_16_FOG, ICON_16_FOG)]^C^C_fog
ID_Lsnew     [_Button("Landscape New", ICON_16_LSNEW, ICON_16_LSNEW)]^C^C_lsnew
ID_Lsedit    [_Button("Landscape Edit", ICON_16_LSEDIT, ICON_16_LSEDIT)]^C^C_lsedit
ID_Lslib     [_Button("Landscape Library", ICON_16_LSLIB, ICON_16_LSLIB)]^C^C_lslib
             [--]
ID_Rpref     [_Button("Render Preferences", ICON_16_RPREF, ICON_16_RPREF)]^C^C_rpref
ID_Stats     [_Button("Statistics", ICON_16_STATS, ICON_16_STATS)]^C^C_stats

**TB_SOLIDS
ID_TbSolids  [_Toolbar("Solids", _Floating, _Hide, 100, 250, 1)]
ID_Box       [_Button("Box", ICON_16_BOX, ICON_16_BOX)]^C^C_box
ID_Sphere    [_Button("Sphere", ICON_16_SPHERE, ICON_16_SPHERE)]^C^C_sphere
ID_Cylinder  [_Button("Cylinder", ICON_16_CYLIND, ICON_16_CYLIND)]^C^C_cylinder
ID_Cone      [_Button("Cone", ICON_16_CONE, ICON_16_CONE)]^C^C_cone
ID_Wedge     [_Button("Wedge", ICON_16_WEDGE, ICON_16_WEDGE)]^C^C_wedge
ID_Torus     [_Button("Torus", ICON_16_TORUS, ICON_16_TORUS)]^C^C_torus
             [--]
ID_Extrude   [_Button("Extrude", ICON_16_EXTRUD, ICON_16_EXTRUD)]^C^C_extrude
ID_Revolve   [_Button("Revolve", ICON_16_REVOLV, ICON_16_REVOLV)]^C^C_revolve
             [--]
ID_Slice     [_Button("Slice", ICON_16_SLICE, ICON_16_SLICE)]^C^C_slice
ID_Section   [_Button("Section", ICON_16_SECTIO, ICON_16_SECTIO)]^C^C_section
ID_Interfere [_Button("Interfere", ICON_16_INTERF, ICON_16_INTERF)]^C^C_interfere
             [--]
ID_Soldraw   [_Button("Setup Drawing",ICON_16_SOLDR, ICON_16_SOLDR)]^C^C_soldraw
ID_Solview   [_Button("Setup View",ICON_16_SOLVW, ICON_16_SOLVW)]^C^C_solview
ID_Solprof   [_Button("Setup Profile",ICON_16_SOLPR, ICON_16_SOLPR)]^C^C_solprof

**TB_SOLIDS2
ID_TbSolids2 [_Toolbar("Solids Editing", _Floating, _Hide, 100, 250, 1)]
ID_Union     [_Button("Union", ICON_16_UNION, ICON_16_UNION)]^C^C_union
ID_Subtract  [_Button("Subtract", ICON_16_SUBTRA, ICON_16_SUBTRA)]^C^C_subtract
ID_Intersect [_Button("Intersect", ICON_16_INTERS, ICON_16_INTERS)]^C^C_intersect
             [--]
ID_FaceExtru [_Button("Extrude Faces", ICON_16_EXTRUD, ICON_16_EXTRUD)]^C^C_solidedit _face _extrude
ID_FaceMove  [_Button("Move Faces", ICON_16_MOVEFACE, ICON_16_MOVEFACE)]^C^C_solidedit _face _move
ID_FaceOffse [_Button("Offset Faces", ICON_16_OFFSETFACE, ICON_16_OFFSETFACE)]^C^C_solidedit _face _offset
ID_FaceDel   [_Button("Delete Faces", ICON_16_DELFACE, ICON_16_DELFACE)]^C^C_solidedit _face _delete
ID_FaceRotat [_Button("Rotate Faces", ICON_16_ROTATEFACE, ICON_16_ROTATEFACE)]^C^C_solidedit _face _rotate
ID_FaceTaper [_Button("Taper Faces", ICON_16_TAPER, ICON_16_TAPER)]^C^C_solidedit _face _taper
ID_FaceCopy  [_Button("Copy Faces", ICON_16_COPYFACE, ICON_16_COPYFACE)]^C^C_solidedit _face _copy
ID_FaceColor [_Button("Color Faces", ICON_16_COLORFACE, ICON_16_COLORFACE)]^C^C_solidedit _face _color
             [--]
ID_EdgeCopy  [_Button("Copy Edges", ICON_16_COPYEDGE, ICON_16_COPYEDGE)]^C^C_solidedit _edge _copy
ID_EdgeColor [_Button("Color Edges", ICON_16_COLOREDGE, ICON_16_COLOREDGE)]^C^C_solidedit _edge _color
             [--]
ID_Imprint   [_Button("Imprint", ICON_16_IMPRINT, ICON_16_IMPRINT)]^C^C_solidedit _body _imprint
ID_BodyCln   [_Button("Clean", ICON_16_CLEAN, ICON_16_CLEAN)]^C^C_solidedit _body _clean
ID_Separate  [_Button("Separate", ICON_16_SEPARATE, ICON_16_SEPARATE)]^C^C_solidedit _body _separate
ID_Shell     [_Button("Shell", ICON_16_SHELL, ICON_16_SHELL)]^C^C_solidedit _body _shell
ID_BodyChk   [_Button("Check", ICON_16_CHECK, ICON_16_CHECK)]^C^C_solidedit _body _check

**TB_STANDARD
ID_TbStandar [_Toolbar("Standard Toolbar", _Top, _Show, 0, 0, 1)]
ID_New       [_Button("New", ICON_16_NEW, ICON_16_NEW)]^C^C_new
ID_Open      [_Button("Open", ICON_16_OPEN, ICON_16_OPEN)]^C^C_open
ID_Save      [_Button("Save", ICON_16_SAVE, ICON_16_SAVE)]^C^C_qsave
             [--]
ID_Print     [_Button("Plot", ICON_16_PRINT, ICON_16_PRINT)]^C^C_plot
ID_Preview   [_Button("Plot Preview", ICON_16_PREVIEW, ICON_16_PREVIEW)]^C^C_preview
ID_TextFind  [_Button("Find and Replace", ICON_16_TEXTFIND, ICON_16_TEXTFIND)]^C^C_find
             [--]
ID_Cutclip   [_Button("Cut to Clipboard", ICON_16_CUT, ICON_16_CUT)]^C^C_cutclip
ID_Copyclip  [_Button("Copy to Clipboard", ICON_16_COPY, ICON_16_COPY)]^C^C_copyclip
ID_Pasteclip [_Button("Paste from Clipboard", ICON_16_PASTE, ICON_16_PASTE)]^C^C_pasteclip
ID_Matchprop [_Button("Match Properties", ICON_16_MATCH, ICON_16_MATCH)]'_matchprop
             [--]
ID_U         [_Button("Undo", ICON_16_UNDO, ICON_16_UNDO)]^C^C_u
ID_Redo      [_Button("Redo", ICON_16_REDO, ICON_16_REDO)]^C^C_redo
             [--]
ID_Today     [_Button("Today", ICON_16_TODAY, ICON_16_TODAY)]^C^C_Today
ID_PointA    [_Button("Autodesk Point A", ICON_16_WHISTLER, ICON_16_WHISTLER)]^C^C_browser http://pointa.autodesk.com
ID_MeetNow   [_Button("Meet Now", ICON_16_MEETNOW, ICON_16_MEETNOW)]^C^C_MeetNow
ID_Publish   [_Button("Publish to Web", ICON_16_PUBWEB, ICON_16_PUBWEB)]^C^C_PublishToWeb
ID_Etransmit [_Button("eTransmit", ICON_16_ETRANSMIT, ICON_16_ETRANSMIT)]^C^C_etransmit
ID_Hyperlink [_Button("Insert Hyperlink", ICON_16_URL, ICON_16_URL)]^C^C_hyperlink
             [--]
ID_TbOsnap   [_Flyout("Object Snap", ICON_16_OSNAP, ICON_16_OSNAP, _OtherIcon, ACAD.TB_OBJECT_SNAP)]
ID_TbUcs     [_Flyout("UCS", ICON_16_UCS, ICON_16_UCS, _OtherIcon, ACAD.TB_UCS)]
             [--]
ID_TbViewpoi [_Flyout("Viewpoint", ICON_16_DDVIEW, ICON_16_DDVIEW, _OtherIcon, ACAD.TB_VIEWPOINT)]
             [--]
ID_3dorbit   [_Button("3D Orbit", ICON_16_3DORBIT, ICON_16_3DORBIT)]'_3dorbit
ID_Pan       [_Button("Pan Realtime", ICON_16_RTPAN, ICON_16_RTPAN)]'_pan
ID_ZoomRealt [_Button("Zoom Realtime", ICON_16_RTZOOM, ICON_16_RTZOOM)]'_zoom ;
ID_TbZoom    [_Flyout("Zoom", ICON_16_ZOOM, ICON_16_ZOOM, _OtherIcon, ACAD.TB_ZOOM)]
ID_ZoomPrevi [_Button("Zoom Previous", ICON_16_ZOOPRE, ICON_16_ZOOPRE)]'_zoom _p
             [--]
ID_Content   [_Button("AutoCAD DesignCenter", ICON_16_OPTCONTENTX, ICON_16_OPTCONTENTX)]$M=$(if,$(and,$(getvar,adcstate),1),'_adcclose,'_adcenter)
ID_Ai_propch [_Button("Properties", ICON_16_MODIFY, ICON_16_MODIFY)]$M=$(if,$(and,$(getvar,opmstate),1),^C^C_propertiesclose,^C^C_properties)
 	     [--]
ID_Help      [_Button("Help", ICON_16_HELP, ICON_16_HELP)]'_help
ID_ASSIST    [_Button("Active Assistance", ICON_16_ASSIST, ICON_16_ASSIST)]'_ASSIST

**TB_STANDARDS
ID_TbCadStd  [_Toolbar("CAD Standards", _Floating, _Hide, 100, 380, 1)]
ID_Standards [_Button("Configure Standards", ICON_16_CONFIGSTD, ICON_16_CONFIGSTD)]^C^C_Standards
ID_CheckStan [_Button("Check Standards", ICON_16_CHECKSTD, ICON_16_CHECKSTD)]^C^C_CheckStandards
ID_LayTrans  [_Button("Layer Translate", ICON_16_LAYTRANS, ICON_16_LAYTRANS)]^C^C_LayTrans

**TB_SURFACES
ID_TbSurface [_Toolbar("Surfaces", _Floating, _Hide, 100, 290, 1)]
ID_Solid     [_Button("2D Solid", ICON_16_SOLID, ICON_16_SOLID)]^C^C_solid
ID_3dface    [_Button("3D Face", ICON_16_3DFACE, ICON_16_3DFACE)]^C^C_3dface
             [--]
ID_Ai_box    [_Button("Box", ICON_16_SURBOX, ICON_16_SURBOX)]^C^C_ai_box
ID_Ai_wedge  [_Button("Wedge", ICON_16_SURWED, ICON_16_SURWED)]^C^C_ai_wedge
ID_Ai_pyrami [_Button("Pyramid", ICON_16_SURPYR, ICON_16_SURPYR)]^C^C_ai_pyramid
ID_Ai_cone   [_Button("Cone", ICON_16_SURCON, ICON_16_SURCON)]^C^C_ai_cone
ID_Ai_sphere [_Button("Sphere", ICON_16_SURSPH, ICON_16_SURSPH)]^C^C_ai_sphere
ID_Ai_dome   [_Button("Dome", ICON_16_SURDOM, ICON_16_SURDOM)]^C^C_ai_dome
ID_Ai_dish   [_Button("Dish", ICON_16_SURDIS, ICON_16_SURDIS)]^C^C_ai_dish
ID_Ai_torus  [_Button("Torus", ICON_16_SURTOR, ICON_16_SURTOR)]^C^C_ai_torus
             [--]
ID_Edge      [_Button("Edge", ICON_16_EDGE, ICON_16_EDGE)]^C^C_edge
ID_3dmesh    [_Button("3D Mesh", ICON_16_3DMESH, ICON_16_3DMESH)]^C^C_3dmesh
             [--]
ID_Revsurf   [_Button("Revolved Surface", ICON_16_REVSUR, ICON_16_REVSUR)]^C^C_revsurf
ID_Tabsurf   [_Button("Tabulated Surface", ICON_16_TABSUR, ICON_16_TABSUR)]^C^C_tabsurf
ID_Rulesurf  [_Button("Ruled Surface", ICON_16_RULESU, ICON_16_RULESU)]^C^C_rulesurf
ID_Edgesurf  [_Button("Edge Surface", ICON_16_EDGESU, ICON_16_EDGESU)]^C^C_edgesurf

**TB_TEXT
ID_TbText    [_Toolbar("Text", _Floating, _Hide, 100, 320, 1)]
ID_Mtext     [_Button("Multiline Text", ICON_16_MTEXT, ICON_16_MTEXT)]^C^C_mtext
ID_Dtext     [_Button("Single Line Text", ICON_16_SINGLE_DTEXT, ICON_16_SINGLE_DTEXT]^C^C_dtext
ID_Ddedit    [_Button("Edit Text", ICON_16_TEXEDI, ICON_16_TEXEDI)]^C^C_ddedit
ID_TextFind  [_Button("Find and Replace", ICON_16_TEXTFIND, ICON_16_TEXTFIND)]^C^C_find
ID_Style     [_Button("Text Style",ICON_16_TXTSTYLE, ICON_16_TXTSTYLE]'_style
ID_Scaletext [_Button("Scale Text", ICON_16_SCALETXT, ICON_16_SCALETXT]^C^C_scaletext
ID_Justifyte [_Button("Justify Text", ICON_16_JUSTIFYTXT, ICON_16_JUSTIFYTXT]^C^C_justifytext
ID_Spacetran [_Button("Convert distance between spaces",ICON_16_SPACETRANS, ICON_16_SPACETRANS]'_spacetrans

**TB_UCS
ID_TbUcs     [_Toolbar("UCS", _Floating, _Hide, 100, 310, 1)]
ID_Ucs       [_Button("UCS", ICON_16_UCS, ICON_16_UCS)]^C^C_ucs
ID_Dducs     [_Button("Display UCS Dialog", ICON_16_DDUCS, ICON_16_DDUCS)]^C^C_+ucsman 0
             [--]
ID_UcsPrevio [_Button("UCS Previous", ICON_16_UCSPRE, ICON_16_UCSPRE)]^C^C_ucs _p
             [--]
ID_UcsWorld  [_Button("World UCS", ICON_16_UCSW, ICON_16_UCSW)]^C^C_ucs _w
ID_UcsObject [_Button("Object UCS", ICON_16_UCSOBJ, ICON_16_UCSOBJ)]^C^C_ucs _ob
ID_UcsFace   [_Button("Face UCS", ICON_16_UCSFACE, ICON_16_UCSFACE)]^C^C_ucs _fa
ID_UcsView   [_Button("View UCS", ICON_16_UCSVIE, ICON_16_UCSVIE)]^C^C_ucs _v
             [--]
ID_UcsOrigin [_Button("Origin UCS", ICON_16_UCSORI, ICON_16_UCSORI)]^C^C_ucs _o
ID_UcsZAxVec [_Button("Z Axis Vector UCS", ICON_16_UCSZAV, ICON_16_UCSZAV)]^C^C_ucs _zaxis
ID_Ucs3point [_Button("3 Point UCS", ICON_16_UCS3PT, ICON_16_UCS3PT)]^C^C_ucs _3
             [--]
ID_UcsXAxRot [_Button("X Axis Rotate UCS", ICON_16_UCSXAR, ICON_16_UCSXAR)]^C^C_ucs _x
ID_UcsYAxRot [_Button("Y Axis Rotate UCS", ICON_16_UCSYAR, ICON_16_UCSYAR)]^C^C_ucs _y
ID_UcsZAxRot [_Button("Z Axis Rotate UCS", ICON_16_UCSZAR, ICON_16_UCSZAR)]^C^C_ucs _z
             [--]
ID_UcsApply  [_Button("Apply UCS", ICON_16_UCSAPPLY, ICON_16_UCSAPPLY)]^C^C_ucs _apply

**TB_UCSII
ID_TbUcsName [_Toolbar("UCS II", _Floating, _Hide, 100, 300, 1)]
ID_Dducs     [_Button("Display UCS Dialog", ICON_16_DDUCS, ICON_16_DDUCS)]^C^C_+ucsman 0
ID_UcsMove   [_Button("Move UCS Origin", ICON_16_UCSMOVE, ICON_16_UCSMOVE)]^C^C_ucs _move
             [--]
ID_UcsCombo  [_Control(_UCSManager)]

**TB_VIEWPOINT
ID_TbViewpoi [_Toolbar("View", _Floating, _Hide, 100, 330, 1)]
ID_Ddview    [_Button("Named Views", ICON_16_DDVIEW, ICON_16_DDVIEW)]^C^C_view
             [--]
ID_VpointTop [_Button("Top View", ICON_16_VIETOP, ICON_16_VIETOP)]^C^C_-view _top
ID_VpointBot [_Button("Bottom View", ICON_16_VIEBOT, ICON_16_VIEBOT)]^C^C_-view _bottom
ID_VpointLef [_Button("Left View", ICON_16_VIELEF, ICON_16_VIELEF)]^C^C_-view _left
ID_VpointRig [_Button("Right View", ICON_16_VIERIG, ICON_16_VIERIG)]^C^C_-view _right
ID_VpointFro [_Button("Front View", ICON_16_VIEFRO, ICON_16_VIEFRO)]^C^C_-view _front
ID_VpointBac [_Button("Back View", ICON_16_VIEBAC, ICON_16_VIEBAC)]^C^C_-view _back
             [--]
ID_VpointSW  [_Button("SW Isometric View", ICON_16_VIESWI, ICON_16_VIESWI)]^C^C_-view _swiso
ID_VpointSE  [_Button("SE Isometric View", ICON_16_VIESEI, ICON_16_VIESEI)]^C^C_-view _seiso
ID_VpointNE  [_Button("NE Isometric View", ICON_16_VIENEI, ICON_16_VIENEI)]^C^C_-view _neiso
ID_VpointNW  [_Button("NW Isometric View", ICON_16_VIENWI, ICON_16_VIENWI)]^C^C_-view _nwiso
             [--]
ID_Camera    [_Button("Camera", ICON_16_CAMERA, ICON_16_CAMERA)]^C^C_camera

**TB_VIEWPORTS
ID_TbVpCreat [_Toolbar("Viewports", _Floating, _Hide, 100, 350, 1)]
ID_VpDialog  [_Button("Display Viewports Dialog", ICON_16_VPDLG, ICON_16_VPDLG)]^C^C_vports
ID_VpSingle  [_Button("Single Viewport", ICON_16_VPONE, ICON_16_VPONE)]$M=$(if,$(eq,$(getvar,tilemode),1),^C^C_-vports _si,^C^C_-vports)
ID_VpPoly    [_Button("Polygonal Viewport", ICON_16_VPPOLY, ICON_16_VPPOLY)]$M=$(if,$(eq,$(getvar,tilemode),0),^C^C_-vports _p,^C^C^P(ai_viewports_alert)^P) 
ID_VpConvert [_Button("Convert Object to Viewport", ICON_16_VPOBJ, ICON_16_VPOBJ)]$M=$(if,$(eq,$(getvar,tilemode),0),^C^C_-vports _o,^C^C^P(ai_viewports_alert)^P)
ID_VpClip    [_Button("Clip Existing Viewport", ICON_16_VPCLIP, ICON_16_VPCLIP)]^C^C_vpclip
             [--]
ID_VPScale   [_Control(_ViewportScale)]

**TB_WEB
ID_TbWeb     [_Toolbar("Web", _Floating, _Hide, 100, 380, 1)]
ID_HlnkBack  [_Button("Go Back", ICON_16_HLNK_BACK, ICON_16_HLNK_BACK)]'_hyperlinkBack
ID_HlnkFwd   [_Button("Go Forward", ICON_16_HLNK_FWD, ICON_16_HLNK_FWD)]'_hyperlinkFwd
ID_HlnkStop  [_Button("Stop Navigation", ICON_16_HLNK_STOP, ICON_16_HLNK_STOP)]'_hyperlinkStop
ID_Browser   [_Button("Browse the Web", ICON_16_WEB, ICON_16_WEB)]^C^C_browser ;

**TB_ZOOM
ID_TbZoom    [_Toolbar("Zoom", _Floating, _Hide, 100, 350, 1)]
ID_ZoomWindo [_Button("Zoom Window", ICON_16_ZOOWIN, ICON_16_ZOOWIN)]'_zoom _w
ID_ZoomDynam [_Button("Zoom Dynamic", ICON_16_ZOODYN, ICON_16_ZOODYN)]'_zoom _d
ID_ZoomScale [_Button("Zoom Scale", ICON_16_ZOOSCA, ICON_16_ZOOSCA)]'_zoom _s
ID_ZoomCente [_Button("Zoom Center", ICON_16_ZOOCEN, ICON_16_ZOOCEN)]'_zoom _c
             [--]
ID_ZoomIn    [_Button("Zoom In", ICON_16_ZOOIN, ICON_16_ZOOIN)]'_zoom 2x
ID_ZoomOut   [_Button("Zoom Out", ICON_16_ZOOOUT, ICON_16_ZOOOUT)]'_zoom .5x
             [--]
ID_ZoomAll   [_Button("Zoom All", ICON_16_ZOOALL, ICON_16_ZOOALL)]'_zoom _all
ID_ZoomExten [_Button("Zoom Extents", ICON_16_ZOOEXT, ICON_16_ZOOEXT)]'_zoom _e


//
//     Begin AutoCAD Image Menus
//

***image
**image_3DObjects
[3D Objects]
[acad(Box3d,Box3d)]^C^C_ai_box
[acad(Pyramid,Pyramid)]^C^C_ai_pyramid
[acad(Wedge,Wedge)]^C^C_ai_wedge
[acad(Dome,Dome)]^C^C_ai_dome
[acad(Sphere,Sphere)]^C^C_ai_sphere
[acad(Cone,Cone)]^C^C_ai_cone
[acad(Torus,Torus)]^C^C_ai_torus
[acad(Dish,Dish)]^C^C_ai_dish
[acad(Mesh,Mesh)]^C^C_ai_mesh

**image_poly
[Set Spline Fit Variables]
[acad(pm-quad,Quadric Fit Mesh)]'_surftype 5
[acad(pm-cubic,Cubic Fit Mesh)]'_surftype 6
[acad(pm-bezr,Bezier Fit Mesh)]'_surftype 8
[acad(pl-quad,Quadric Fit Pline)]'_splinetype 5
[acad(pl-cubic,Cubic Fit Pline)]'_splinetype 6

**image_vporti
[Tiled Viewport Layout]
[acad(vport-1,Single)]^C^C(ai_tiledvp 1 nil)
[acad(vport-3v,Three: Vertical)]^C^C(ai_tiledvp 3 "_V")
[acad(vport-3h,Three: Horizontal)]^C^C(ai_tiledvp 3 "_H")
[acad(vport-4,Four:  Equal)]^C^C(ai_tiledvp 4 nil)
[acad(vport-2v,Two:   Vertical)]^C^C(ai_tiledvp 2 "_V")
[acad(vport-3r,Three: Right)]^C^C(ai_tiledvp 3 "_R")
[acad(vport-3l,Three: Left)]^C^C(ai_tiledvp 3 "_L")
[acad(vport-4l,Four:  Left)]^C^C(ai_tiledvp 4 "_L")
[acad(vport-2h,Two:   Horizontal)]^C^C(ai_tiledvp 2 "_H")
[acad(vport-3a,Three: Above)]^C^C(ai_tiledvp 3 "_A")
[acad(vport-3b,Three: Below)]^C^C(ai_tiledvp 3 "_B")
[acad(vport-4r,Four:  Right)]^C^C(ai_tiledvp 4 "_R")

//
//  AutoCAD Screen Menus
//
//  There are two types of screen menus: command menus and options menus
//  Command menus provide access to the lists of AutoCAD commands.
//  Options menus provides access to the options available for individual commands.
//
//  There are 22 lines between menu titles.  This is one method for assuring that each time
//  that a menu is called that it overwrites the previous menu.
//
//  The organization of the command menus generally follows the organization of the pull-down menus.
//  A command has a screen menu item only if it has a pull-down menu item.
//  Command menus have, as much as possible, the same name as the equivalent pull-down menu.
//  Command menus have, as much as possible, the same items in the same order as the pull-down menus.
//
//  Command menus generally use the command name while pull-down menus offer a more descriptive title.
//  Items in command menus that call other command menus are in upper case.
//
//  Command menu names start with a number and are located after the special menus.
//
***SCREEN
**SDDD
**14_JBDS1
[---JBD Set---]
[Unit:       ]^C^C(setq UNIT (GETSTRING"(M/m)eter/(F/f)eet :"));\(IF (or (= UNIT "m") (= UNIT "M")) (progn (SETQ FAKTOR 1000) (setq Ft "")(SETQ DGT3 100) (SETQ DGT2 10) (SETQ DGT1 0) (SETQ CF 1.0) (SETQ NDEC ".000")(SETQ JFT 4) (SETQ METER 0.3048) (setq msq "mp") ));(IF (or (= UNIT "f") (= UNIT "F")) (progn (SETQ FAKTOR 100) (setq Ft "'")(SETQ DGT3 10) (SETQ DGT2 0) (SETQ DGT1 0.1) (SETQ CF 1.0) (SETQ NDEC ".00")(SETQ JFT 3) (SETQ METER 1.0) (setq msq "kp") ));
[Scale:      ]^C^C(SETQ SKIL (getreal"Enter Scale :  "));\(setq PAWD (GETVAR "CDATE"));(SETQ SKIL (* SKIL CF));(SETQ TH (* METER (* SKIL 0.005250)));(setq d1 (* METER (* SKIL 0.0031)));(setq WITH (* METER (* SKIL 0.00378)));(setq d2 (+ d1 th));(setq d3 (+ d1 D2));(setq d4 (+ d2 D2));(setq SZERO "0" sp " " pt "." sp1 "");(SETQ SDEG "%%D" SMIN "'" SSEC "%%34");(setq style "standard");(setq FK1 (* 0.9995 FAKTOR));(setq spnt (list 10 10 10));
[Height(mm):]^C^C(SETQ TINGGI (getreal"Enter Text Height (mm) :  "));\(SETQ HTT(* (/ TINGGI 1000.0) 3.28084));(SETQ TH (* METER SKIL HTT));(setq d1 (* METER SKIL HTT 0.6));(setq WITH (* METER SKIL 0.00378) );(setq d2 (+ d1 th));(setq d3 (+ d1 D2));(setq d4 (+ d2 D2));(SETQ Xm0 (polar xm (+ BG (/ pi 2)) d1));(SETQ Xm3 (polar xm (- BG (/ pi 2)) d2));(SETQ Xm2 (POLAR XM (+ BG (/ PI 2)) D3))(SETQ XM4(POLAR XM (- BG (/ PI 2)) D4)) 
[Decplace:]^C^C(setq JFT(+ 1 (GETINT "Enter Decimal Places: ")));\
[Survey unit ]^C^Cjo
[Txt Style-->>]$S=ACAD.14_JBDS14
[line Type-->>]$S=ACAD.15_JBDS15
[Frame----->> ]$S=ACAD.11_JBDS11
[Color----->> ]$S=ACAD.12_JBDS12
[Layer----->> ]$S=ACAD.13_JBDS13

[JBD Lips]^C^Cappload
[JBD menu1]^C^Cjbdmenu
[Default Layer]^C^CMKA
[Layer Of/Fr]^C^Coly
[Layer Crt ]^C^C(Load "CLY");CLY
[Copy layer ]^C^Ccoy
[Dummy layer]^C^CDL;
[Dummy On   ]^C^CD+L;
[Dummy Off  ]^C^CDL-;
[Purge All  ]^C^CPAA;
[Jion Line ]^C^CLJOIN
[segment  ]^C^CSEG;
[Leader:  ]^C^Cqleader;
[Pedit:  ]^C^Cpedit;
[Dimension(A)]^C^CDIMALIGNED;
[Paste(O):  ]^C^Cpasteorig;
[Properties:  ]^C^CProperties;

[JBD 1      ]$S=ACAD.14_JBDS1
[JBD LISTING]$S=ACAD.15_JBDS2 
[JBD BCK&TXT]$S=ACAD.16_JBDS3
[JBD PILE   ]$S=ACAD.19_JBDS6
[JBD SYSMBOL]$S=ACAD.17_JBDS4
[JBD Function]$S=ACAD.18_JBDS5

**11_JBDS11
[    Frame  ]

[P A0 B   ]^C^CPA0_1000
[P A0 R   ]^C^CPA0_1000
[P A1 B   ]^C^CPA0_1000
[P A1 R   ]^C^CPA0_1000
[P A2 B   ]^C^CPA0_1000
[P A2 R   ]^C^CPA0_1000
[P A3 B   ]^C^CPA0_1000
[P A3 R   ]^C^CPA0_1000

[L A0 B   ]^C^CPA0_1000
[L A0 R   ]^C^CPA0_1000
[L A1 B   ]^C^CPA0_1000
[L A1 R   ]^C^CPA0_1000
[L A2 B   ]^C^CPA0_1000
[L A2 R   ]^C^CPA0_1000
[L A3 B   ]^C^CPA0_1000
[L A3 R   ]^C^CPA0_1000








[Back<<-----  ]$S=ACAD.14_JBDS1

**12_JBDS12
[    Color  ]


[C White  ]^C^CCW;
[C Yellow ]^C^CCY;
[C Green  ]^C^CCG;
[C Blue   ]^C^CCB;
[C Red    ]^C^CCR;


[C 8  ]^C^Cc8;
[C 9  ]^C^Cc9;
[C 11  ]^C^Cc11;
[C 30  ]^C^Cc30;
[C 31  ]^C^Cc31;
[C 41  ]^C^Cc41;
[C 51  ]^C^Cc51;
[C 100  ]^C^Cc100;
[C 101 ]^C^Cc101;
[C 130 ]^C^Cc130;
[C 150 ]^C^Cc150;
[C 214  ]^C^Cc214;
[C 240  ]^C^Cc240;
[C 251 ]^C^Cc251;
[C 254   ]^C^Cc254;
[North]^C^C_VSLIDE jbd(north_logo)
[Plantation]^C^C_VSLIDE jbd(plantation)
[Chroma1]^C^C_VSLIDE acad(chroma)
[ Restore]'_REDRAW
[	]
[	]





[Back<<---  ]$S=ACAD.14_JBDS1

**13_JBDS13
[    Layer  ]
[Lotare  ]^C^CCW;
[Plan_info  ]^C^CCW;
[Drin_X  ]^C^CCW;
[Landuse ]^C^CCY;
[Precomp_L  ]^C^CCG;
[Precomp_BD   ]^C^CCB;
[Traverse   ]^C^CCB;
[Lot   ]^C^CCB;
[Lot_info   ]^C^CCB;

[Hatch_Landuse]^C^CCR;
[Hatch_Build  ]^C^CCR;
[Hatch_Road   ]^C^CCR;
[Hatch_River  ]^C^CCR;

[Cut_Top   ]^C^CCB;
[Cut_Bot   ]^C^CCB;
[Drain_Con   ]^C^CCB;
[Drain_earth   ]^C^CCB;
[Fnc_Chain  ]^C^CCW;
[Fnc_Steel  ]^C^CCW;
[Fnc_Wire  ]^C^CCW;
[Fnc_Wood  ]^C^CCW;
[Fnc_Con  ]^C^CCW;
[RcWall_Top   ]^C^CCB;
[RcWall_Bot   ]^C^CCB;
[Rd_Earth  ]^C^CCW;
[Rd_Con    ]^C^CCR;
[Rd_Tar   ]^C^CCW;
[Rd_Foot  ]^C^CCW;
[Rd_Divid  ]^C^CCW;
[Rd_Guard  ]^C^CCW;
[Rd_White  ]^C^CCW;

[Back<<---  ]$S=ACAD.14_JBDS1

**14_JBDS14
[  TEXT STYLE  ]
[ARIAL   ]^C^CTSARIAL
[ARIAL BLACK]^C^CTSAB
[SSOCP    ]^C^CTSISOCP
[ROMANS   ]^C^CTSROMANS
[TIME NR   ]^C^CTSTNR





























[Back<<-----  ]$S=ACAD.14_JBDS1

**15_JBDS15
[  Line Type  ]
[[Cutting (Tri)]^C^CCUT
[Cutting Exist (1)]^C^CSLP2
[Cutting Exist (2)]^C^CSLP3
[Cutting Design(L)]^C^Clc

[chain Link Fence ]^C^CPAGAR
[???chain Link Fence2]^C^CFEN2
[iron Fence]^C^Csymline

[C2 Zinc Fen]^C^Ccltzigzag
























[Back<<-----  ]$S=ACAD.14_JBDS1


**15_JBDS2
[------ LISTING ------]
[Pt To Pt:]^C^Cpt-to-pt
[Bg/D]^C^C(COMMAND "layer" "s" TXTLA);;(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""))(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(command "text" "JUSTIFY" "C" Xm3 th bg4 JRKTXT)(SETQ TJRK(list (ENTLAST) spnt))(COMMAND "text" "JUSTIFY" "C" xm0 th bg4 BgTXT)(SETQ TBGJK(list (ENTLAST) spnt)) 
[Bg/]^C^C(COMMAND "layer" "s" TXTLA);;(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""))(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(COMMAND "text" "JUSTIFY" "C" Xm0 th bg4 BgTXT)(SETQ TBGJK(list (ENTLAST) spnt)) 
[D/]^C^C(COMMAND "layer" "s" TXTLA);;(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""))(COMMAND "text" "JUSTIFY" "C" XM0 th bg4 JRKTXT)(SETQ TJRK(list (ENTLAST) spnt)) 
[/Bg]^C^C(COMMAND "layer" "s" TXTLA);;(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""))(command "text" "JUSTIFY" "C"  Xm3 th bg4 BGTXT)(SETQ TBGJK(list (ENTLAST) spnt)) 
[/D]^C^C(COMMAND "layer" "s" TXTLA);;(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""))(command "text" "JUSTIFY" "C" Xm3 th bg4 JRKTXT)(SETQ TJRK(ENTLAST)) 
[D/Bg]^C^C(COMMAND "layer" "s" TXTLA);;(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""))(COMMAND "text" "JUSTIFY" "C" xm0 th bg4 JRKTXT)(SETQ TJRK(list (ENTLAST) spnt))(command "text" "JUSTIFY" "C" Xm3 th bg4 BgTXT)(SETQ TBGJK(list (ENTLAST) spnt)) 
[Bg,D/]^C^C(COMMAND "layer" "s" TXTLA);;(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""))(command "text" "JUSTIFY" "C" Xm0 th bg4 JRKTXT)(SETQ TJRK(list (ENTLAST) spnt))(COMMAND "text" "JUSTIFY" "C" xm2 th bg4 BgTXT)(SETQ TBGJK(list (ENTLAST) spnt)) 
[/Bg,D]^C^C(COMMAND "layer" "s" TXTLA);;(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""))(command "text" "JUSTIFY" "C" Xm4 th bg4 JRKTXT)(SETQ TJRK(list (ENTLAST) spnt))(COMMAND "text" "JUSTIFY" "C" xm3 th bg4 BgTXT)(SETQ TBGJK(list (ENTLAST) spnt)) 
[/Bg_D]^C^C(COMMAND "layer" "s" TXTLA);;(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""))(setq BGJRK (strcat BGTXT SP JRKTXT))(COMMAND "text" "JUSTIFY" "C" xm3 th bg4 BGJRK)(SETQ TBGJK(list (ENTLAST) spnt)) 
[Bg_D/]^C^C(COMMAND "layer" "s" TXTLA);;(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""))(setq BGJRK (strcat BGTXT SP JRKTXT))(command "text" "JUSTIFY" "C" Xm0 th bg4 BGJRK)(SETQ TBGJK(list (ENTLAST) spnt)) 
[Height (mm):]^C^C(SETQ TINGGI (getreal"Enter Text Height (mm) :  "));\(SETQ HTT(* (/ TINGGI 1000.0) 3.28084));(SETQ TH (* METER SKIL HTT));(setq d1 (* METER SKIL HTT 0.6));(setq WITH (* METER SKIL 0.00378) );(setq d2 (+ d1 th));(setq d3 (+ d1 D2));(setq d4 (+ d2 D2));(SETQ Xm0 (polar xm (+ BG (/ pi 2)) d1));(SETQ Xm3 (polar xm (- BG (/ pi 2)) d2));(SETQ Xm2 (POLAR XM (+ BG (/ PI 2)) D3))(SETQ XM4(POLAR XM (- BG (/ PI 2)) D4)) 
[Bg+180:]^C^C(SETQ DEGG(ATOI DEG));(IF (< DEGG 180) (SETQ DEGH (+ 180 DEGG)));(IF (>= DEGG 180) (SETQ DEGH (- DEGG 180)));(SETQ DEG(ITOA DEGH));(SETQ BGTXT (STRCAT DEG sdeg SP SP1 MIN smin SP SA SZERO ssec));
[Space:]^C^Cruang
[None:]^C^C(IF (/= TJRK NIL) (COMMAND "ERASE" TJRK ""))(IF (/= TBGJK NIL) (COMMAND "ERASE" TBGJK ""));

[list B/D_PTS]^C^Cwbd
[list B/D_LINE]^C^CwbdOLD
[Bg/D]^C^C(setq Y0 NIL Y1 NIL Y2 NIL Y3 NIL Y4 NIL BD1 NIL BD2 NIL BD3 NIL BD4 NIL);(setq Y3 "YA");(setq Y0 "YA")(setq BD1 "YA")(setq BD4 "YA")(LOAD"ALINE5") maingame;

[Label XY]^C^Cxyj
[get Coord]^C^Cxy
[Area(m2_1D)]^C^C(SETQ PCEN(GETPOINT "Select Internal Point :"));\(SETQ BAREA (BPOLY PCEN));(IF (/= barea nil) (progn(COMMAND "AREA" "ENTITY" barea);(SETQ LUAS(GETVAR"AREA"))(SETQ LLUAS(* LUAS 10.76391042))(SETQ LU2 (RTOS LLUAS 2 0))(setq lu1 (RtoS LUAS 2 1))(SETQ LLTXT(STRCAT LU2 "kp"))(setq LUASTXT(STRCAT lu1 SP msq))(setq Lp (getvar"lastpoint"))(COMMAND "LAYER" "S" "LOTARE" "");;(command "text" "s" style PCEN th 90 LUASTXT)'(command "text" "" LLTXT);(entdel barea)(command "redraw");))(IF (= area nil) (PRINC (CAR (bherrs)))) 
[Area(m2_3D)]^C^Cbp
[Area (Ac)  ]^C^Cac
[Pile Dev ]^C^C(LOAD"PILE2");PPGE;
[Make Poly]^C^CBPOLY;


[JBD 1      ]$S=ACAD.14_JBDS1
[JBD LISTING]$S=ACAD.15_JBDS2 
[JBD BCK&TXT]$S=ACAD.16_JBDS3
[JBD PILE   ]$S=ACAD.19_JBDS6
[JBD SYSMBOL]$S=ACAD.17_JBDS4
[JBD Function]$S=ACAD.18_JBDS5






**16_JBDS3
[----- JBD_BLOCK ------]
[B_Explode ]^C^CBLKBUST
[B_Count   ]^C^CBLKCOUNT
[B_Out     ]^C^CBLKCOUT
[B_Pick    ]^C^CBLKPICK
[B_Show    ]^C^CBLKSHOW
[B_Swap    ]^C^CBLKSWAP

[T_append: ] ^C^Ctappend
[T_Search:  ]^C^Ctsearch
[T_Replace: ]^C^Ctreplace
[T_Case:    ]^C^Ctcase	
[T_Justify: ]^C^Ctjustify
[T_Height:  ]^C^CTHEIGHT
[T_Stretch: ]^C^CTSTRETCH
[T_Rotate: ] ^C^CTXROT	
[T_Read:    ]^C^CTXTREAD
[T_Write:   ]^C^CTXTWRITE
[T_Weidth ]^C^Cctw
[T_All:   ]^C^Ccht

[Txtwrite:]^C^Ctxtwrite
[Stickems:]^C^Cstickems
[Showcode:]^C^Cshowcode

[RENAME:]^C^C_RENAME
[DXFOUT:]^C^C_DXFOUT


[	    ]
[JBD 1      ]$S=ACAD.14_JBDS1
[JBD LISTING]$S=ACAD.15_JBDS2 
[JBD BCK&TXT]$S=ACAD.16_JBDS3
[JBD PILE   ]$S=ACAD.19_JBDS6
[JBD SYSMBOL]$S=ACAD.17_JBDS4
[JBD Function]$S=ACAD.18_JBDS5




**17_JBDS4
[------ JBD_SYMBOL ------]
[POINTS]
[Plantation----->>]$S=ACAD.30_JBDs30
[ManHole-------->>]$S=ACAD.31_JBDs31
[MARKER--------->>]$S=ACAD.32_JBDs32
[Road ---------->>]$S=ACAD.33_JBDs33
[North 1--------->>]$S=ACAD.35_JBDs35
[North 2--------->>]$S=ACAD.37_JBDs37
[3D / Contour--->> ]$S=ACAD.34_JBDS34
[Boundary Mark--->>]$S=ACAD.36_JBDs36

[chain Link Fence ]^C^CPAGAR
[???chain Link Fence2]^C^CFEN2
[iron Fence]^C^Csymline

[Cutting Angle    ]^C^CJC
[Cutting Exist (1)]^C^CSLP2
[Cutting Exist (2)]^C^CSLP3
[Cutting Design(L)]^C^Clc

[Insert Culvert ]^C^Ccul
[Draw Sump (3D) ]^C^Cbox
[Draw Sump ]^C^CSQ
[Arrow (Road)]^C^CarWb

*[Dummy Pts]^C^Clpts
*[Dummy Ht]^C^Clht



[JBD 1      ]$S=ACAD.14_JBDS1
[JBD LISTING]$S=ACAD.15_JBDS2 
[JBD BCK&TXT]$S=ACAD.16_JBDS3
[JBD PILE   ]$S=ACAD.19_JBDS6
[JBD SYSMBOL]$S=ACAD.17_JBDS4
[JBD Function]$S=ACAD.18_JBDS5



**30_JBDS30
[    PLANTATION  ]
[T01 Bambo   ]^C^Ctr1
[T02 Coconut ]^C^Ctr2
[T03 Flower  ]^C^Ctr3
[T04 Oil Palm]^C^Ctr4
[T05 Swamp   ]^C^Ctr5
[T06 Tree    ]^C^Ctr6
[T07 Tree    ]^C^CTr7
[T08 Tree    ]^C^CTr8
[T09 Tree    ]^C^CTr9
[T10 Tree    ]^C^CTr10
[T11 Tree    ]^C^CTr11
[T12 Tree    ]^C^CTr12
[T13 Tree    ]^C^CTr13
[T14 Tree    ]^C^CTr14
[T15 Tree    ]^C^CTr15
[T16 Tree    ]^C^CTr16
[T17 Tree    ]^C^CTr17
[T18 Tree    ]^C^CTr18
[T19 Tree    ]^C^CTr19
[T20 Tree    ]^C^CTr20
[T21 Tree    ]^C^CTr21
[T22 Tree    ]^C^CTr22
[T23 Tree    ]^C^CTr23
[T24 Tree    ]^C^CTr24
[T25 Tree    ]^C^CTr25
[T26 Tree    ]^C^CTr26
[T27 Tree    ]^C^CTr27
[T28 Tree    ]^C^CTr28
[T29 Tree    ]^C^CTr29
[T30 Tree    ]^C^CTr30

[Preview Tree]^C^C_VSLIDE jbdSLID(plantation)
[ Restore]'_REDRAW

[Back<<---]$S=ACAD.17_JBDS4






**31_JBDS31
[       MH   ]
[MH01 Telekom]^C^CMHTEL
[MH02 STM   ]^C^CMHTEL
[MH03 Digi  ]^C^CMHDIGI
[MH04 Celcom]^C^CMHCELCOM
[MH05 Maxis ]^C^CMHMAXIS
[MH06 TNB   ]^C^CMHTNB
[MH07 JBA   ]^C^CMHJBA
[MH08 JPP   ]^C^CMHJPP
[MH09 GAS   ]^C^CMHGAS
[MH09 MPAJ  ]^C^CMHMPAJ
[MH10 MPPJ  ]^C^CMHMPPJ
[MH11 MPSA  ]^C^CMHMPPJ
[MH12 MPSJ  ]^C^CMHMPPJ
[MH13 MPK   ]^C^CMHMPPJ
[MH14 DBKL  ]^C^CMHMPPJ
[MH15 MPPJ  ]^C^CMHMPPJ
[MH16 MPPJ  ]^C^CMHMPPJ
[MH17 MPPJ  ]^C^CMHMPPJ
[MH18 MPPJ  ]^C^CMHMPPJ
[MH19 MPPJ  ]^C^CMHMPPJ
[MH10 MPPJ  ]^C^CMHMPPJ
[MH10 MPPJ  ]^C^CMHMPPJ
[	]
[	]
[	]
[	]

[Back<<---]$S=ACAD.17_JBDS4







**32_JBDS32
[    Marker  ]
[M01 Maxis    ]^C^CMAXISM
[M02 Digi     ]^C^CDIGIM
[M03 Celcom   ]^C^CCELCOMM
[M04 TNB      ]^C^CTNBM
[M05 JBA      ]^C^CJBAM
[M06 JKR      ]^C^CJKRM
[M07 Kilometer]^C^CKMM
[M08 LV       ]^C^CLVM
[M09 Gas      ]^C^CGASM
[M10 Hydrant ]^C^CGASM











[	]
[	]
[	]
[	]


[Back<<---]$S=ACAD.17_JBDS4






**33_JBDS33
[    Road Utility  ]
[Electric Post ]^C^CEP
[Telephone Post]^C^CTP
[Lamp Post     ]^C^CLP
[Fire Hydrant  ]^C^CHY
[Public Phone  ]^C^CPP
[Road Sign     ]^C^CRS
[Sign Board    ]^C^CSB














[	]
[	]
[	]
[	]

[Back<<---]$S=ACAD.17_JBDS4

**34_JBDS34
[    3D / Contour  ]
[Add 3D Pt     ]^C^Cspot
[Tag Pts Ht    ]^C^Cmp
[Add Contour   ]^C^CCONT
[Tag Countour  ]^C^CTG
[Tag Con. RL   ]^C^CLABELCO
*[Tag Height]^C^CLath

[Inter Contour ]^C^Ccontour
[3D TO 2D]^C^C3d2d
[Z=0	 ]^C^CZ0

[Draw Segment]^C^Cseg
[Assign Height ]^C^CZMT
[List Height ]^C^Clb
[Compute dZ ]^C^CDXY
[Compute 3D]^C^Css
[Compute Gradient ]^C^Cgrd

[Arrow (Drain)]^C^CarW2










[	]
[	]
[	]
[	]


[Back<<-----]$S=ACAD.18_JBDS5

**35_JBDS35
[    North 1 ]
[N1     ]^C^CN1
[N2     ]^C^CN2
[N3     ]^C^CN3
[N4     ]^C^CN4
[N5     ]^C^CN5
[N6     ]^C^CN6
[N7     ]^C^CN7
[N8     ]^C^CN8
[N9     ]^C^CN9
[N10    ]^C^CN10
[N11    ]^C^CN11
[N12    ]^C^CN12
[N13    ]^C^CN13
[N14    ]^C^CN14
[N15    ]^C^CN15
[N16    ]^C^CN16
[N17    ]^C^CN17
[N18    ]^C^CN18
[N19    ]^C^CN19
[N20    ]^C^CN20
[N21    ]^C^CN21
[N22    ]^C^CN22
[N23    ]^C^CN23
[N24    ]^C^CN24
[N25    ]^C^CN25
[N26    ]^C^CN26
[N27    ]^C^CN27
[N28    ]^C^CN28
[N29    ]^C^CN29
[N30    ]^C^CN30

[Preview North 1]^C^C_VSLIDE jbdSLID(north_logo)
[ Restore]'_REDRAW

[Back<<---]$S=ACAD.17_JBDS4

**37_JBDS37
[    North 2 ]
[NO1     ]^C^CNO1
[NO2     ]^C^CNO2
[NO3     ]^C^CNO3
[NO4     ]^C^CNO4
[NO5     ]^C^CNO5
[NO6     ]^C^CNO6
[NO7     ]^C^CNO7
[NO8     ]^C^CNO8
[NO9     ]^C^CNO9
[NO10    ]^C^CNO10
[NO11    ]^C^CNO11
[NO12     ]^C^CNO12
[NO13     ]^C^CNO13
[NO14     ]^C^CNO14
[NO15     ]^C^CNO15
[NO16     ]^C^CNO16
[NO17     ]^C^CNO17
[NO18     ]^C^CNO18
[NO19     ]^C^CNO19
[NO20     ]^C^CNO20
[NO21     ]^C^CNO21
[NO22     ]^C^CNO22
[NO23     ]^C^CNO23
[NO24     ]^C^CNO24
[NO25     ]^C^CNO25
[NO26     ]^C^CNO26
[NO27     ]^C^CNO27
[NO28     ]^C^CNO28
[NO29     ]^C^CNO29
[NO30     ]^C^CNO30

[Preview North 2]^C^C_VSLIDE jbdSLID(north_logo2)
[ Restore]'_REDRAW

[Back<<---]$S=ACAD.17_JBDS4

**18_JBDS5
[------ JBD Function ------]
[STAMPER]^C^CSTA
[Showcode:]^C^Cshowcode

[Select Text     ]^C^Cgto
[Select Circle     ]^C^Cgco
[Select Line     ]^C^Cglo
[Erase Text      ]^C^Ceto
[Erase Line      ]^C^Celo

[Multi filter ]^C^CSSX
[Move Unit]^C^CSgap
[Move Left]^C^CL4
[Move Right]^C^CL6
[Move Top]^C^CL8
[Move Bottom]^C^CL2

[Rot Pend LnS]^C^Ctp
[Rotate Txt 180 ]^C^Crt
[Num Convert]^C^Crajan

[Clone Entity]^C^Cclone
[Add IL]^C^CIL
[Add Ki]^C^CKi
[Add m2]^C^Cm2
[Add Jum]^C^CJUM
[Inspect: ]^C^Cinspect 			
[Grid Maker]^C^Cgm


[JBD 1      ]$S=ACAD.14_JBDS1
[JBD LISTING]$S=ACAD.15_JBDS2  
[JBD BCK&TXT]$S=ACAD.16_JBDS3
[JBD PILE   ]$S=ACAD.19_JBDS6
[JBD SYSMBOL]$S=ACAD.17_JBDS4
[JBD Function]$S=ACAD.18_JBDS5

**36_JBDS36
[Boundary Mark]
[BKB ]^C^CBAMBO
[BKL ]^C^CCNUT
[BL ]^C^CCNUT
[PB  ]^C^CFLOWER
[PL  ]^C^COILP
[pk.B]^C^CSWAMP
[pk.L]^C^CTREE
[PpBB]^C^COILP
[PpBL]^C^CSWAMP
[PgKL]^C^CTREE
[Pkt]^C^CSWAMP
[HWP]^C^CTREE
[HWP.L]^C^CTREE
[TT]^C^CTREE
[TAB]^C^CTREE






[	]
[	]
[	]
[	]


[Back<<---]$S=ACAD.17_JBDS4


**19_JBDS6
[---- JBD_Precomp ----]

[Offset----->>]$S=ACAD.61_JBDs61

[Add PT (S)    ]^C^CPTL
[Add PT (M)    ]^C^CPTL2
[PT NO]^C^Cptno
[SEQUENCE]^C^CSEQUENCE
[Auto Number   ]^C^Citi
[Edit Number   ]^C^Cnid
[Edit Number(D)]^C^Cchf
[Add +1	    ]^C^CNPO

[Change Txt(S)]^C^Cctt
[Change Txt(M)]^C^Cct

[Drw Line....]^C^CALINE2
[Drw Line (LL) ]^C^CLL
[Drw Line (LM)]^C^CLM
[Drw Line (LMR)]^C^CLMR
[Drw Line (LMRS)]^C^Caline10
[Drw Line]^C^Cdpar








[JBD 1      ]$S=ACAD.14_JBDS1
[JBD LISTING]$S=ACAD.15_JBDS2 
[JBD BCK&TXT]$S=ACAD.16_JBDS3
[JBD PILE   ]$S=ACAD.19_JBDS6
[JBD SYSMBOL]$S=ACAD.17_JBDS4
[JBD Function]$S=ACAD.18_JBDS5


**61_JBDS61
[Offset/ Corner Cut]

[Offset   5F    ]^C^Cofc5
[Offset  10F    ]^C^Cofc10
[Offset  15F    ]^C^Cofc15
[Offset  20F    ]^C^Cofc20
[Offset  30F    ]^C^Cofc30
[Offset  40F    ]^C^Cofc40
[Offset  50F    ]^C^Cofc50
[Offset  60F    ]^C^Cofc60
[Offset  80F    ]^C^Cofc80
[Offset 100F    ]^C^Cofc100


[Corner   5F    ]^C^Ccc5
[Corner  10F    ]^C^Ccc10
[Corner  15F    ]^C^Ccc15
[Corner  20F    ]^C^Ccc20
[Corner  30F    ]^C^Ccc30
[Corner  40F    ]^C^Ccc40
[Corner  50F    ]^C^Ccc50
[Corner  60F    ]^C^Ccc60
[Corner  80F    ]^C^Ccc80
[Corner 100F    ]^C^Ccc100

[Offset (M/F/L)  ]^C^Cofm
[Multi Offset(LNS) ]^C^Cmof
[Multi Offset(PTS)]^C^Cmpar
[Offset Pts(mm)]^C^Cofp






[Back<<-----]$S=ACAD.18_JBDS5





**ENDSCREEN

//
//      Begin AutoCAD Tablet Menus
//
//      This is the TABLET1 menu.  You may put your own
//      macros and menu items here in these spaces.
//      All of the "blank" line items actually contain a
//      backslash so that no command is issued when you pick any
//      of them from the tablet.  Remove them if you want an Enter
//      to happen when they are selected, or place your own
//      macros in their place.

***TABLET1
**TABLET1STD
[A-1]\
[A-2]\
[A-3]\
[A-4]\
[A-5]\
[A-6]\
[A-7]\
[A-8]\
[A-9]\
[A-10]\
[A-11]\
[A-12]\
[A-13]\
[A-14]\
[A-15]\
[A-16]\
[A-17]\
[A-18]\
[A-19]\
[A-20]\
[A-21]\
[A-22]\
[A-23]\
[A-24]\
[A-25]\
[B-1]\
[B-2]\
[B-3]\
[B-4]\
[B-5]\
[B-6]\
[B-7]\
[B-8]\
[B-9]\
[B-10]\
[B-11]\
[B-12]\
[B-13]\
[B-14]\
[B-15]\
[B-16]\
[B-17]\
[B-18]\
[B-19]\
[B-20]\
[B-21]\
[B-22]\
[B-23]\
[B-24]\
[B-25]\
[C-1]\
[C-2]\
[C-3]\
[C-4]\
[C-5]\
[C-6]\
[C-7]\
[C-8]\
[C-9]\
[C-10]\
[C-11]\
[C-12]\
[C-13]\
[C-14]\
[C-15]\
[C-16]\
[C-17]\
[C-18]\
[C-19]\
[C-20]\
[C-21]\
[C-22]\
[C-23]\
[C-24]\
[C-25]\
[D-1]\
[D-2]\
[D-3]\
[D-4]\
[D-5]\
[D-6]\
[D-7]\
[D-8]\
[D-9]\
[D-10]\
[D-11]\
[D-12]\
[D-13]\
[D-14]\
[D-15]\
[D-16]\
[D-17]\
[D-18]\
[D-19]\
[D-20]\
[D-21]\
[D-22]\
[D-23]\
[D-24]\
[D-25]\
[E-1]\
[E-2]\
[E-3]\
[E-4]\
[E-5]\
[E-6]\
[E-7]\
[E-8]\
[E-9]\
[E-10]\
[E-11]\
[E-12]\
[E-13]\
[E-14]\
[E-15]\
[E-16]\
[E-17]\
[E-18]\
[E-19]\
[E-20]\
[E-21]\
[E-22]\
[E-23]\
[E-24]\
[E-25]\
[F-1]\
[F-2]\
[F-3]\
[F-4]\
[F-5]\
[F-6]\
[F-7]\
[F-8]\
[F-9]\
[F-10]\
[F-11]\
[F-12]\
[F-13]\
[F-14]\
[F-15]\
[F-16]\
[F-17]\
[F-18]\
[F-19]\
[F-20]\
[F-21]\
[F-22]\
[F-23]\
[F-24]\
[F-25]\
[G-1]\
[G-2]\
[G-3]\
[G-4]\
[G-5]\
[G-6]\
[G-7]\
[G-8]\
[G-9]\
[G-10]\
[G-11]\
[G-12]\
[G-13]\
[G-14]\
[G-15]\
[G-16]\
[G-17]\
[G-18]\
[G-19]\
[G-20]\
[G-21]\
[G-22]\
[G-23]\
[G-24]\
[G-25]\
[H-1]\
[H-2]\
[H-3]\
[H-4]\
[H-5]\
[H-6]\
[H-7]\
[H-8]\
[H-9]\
[H-10]\
[H-11]\
[H-12]\
[H-13]\
[H-14]\
[H-15]\
[H-16]\
[H-17]\
[H-18]\
[H-19]\
[H-20]\
[H-21]\
[H-22]\
[H-23]\
[H-24]\
[H-25]\
[I-1]\
[I-2]\
[I-3]\
[I-4]\
[I-5]\
[I-6]\
[I-7]\
[I-8]\
[I-9]\
[I-10]\
[I-11]\
[I-12]\
[I-13]\
[I-14]\
[I-15]\
[I-16]\
[I-17]\
[I-18]\
[I-19]\
[I-20]\
[I-21]\
[I-22]\
[I-23]\
[I-24]\
[I-25]\
**ENDTAB1

//      TABLET2 menu.
//      Rows: J to R (9) 
//      Columns: 11       
//
***TABLET2
**TABLET2STD
// Row J View
^C^C_regen
'_zoom _e
'_zoom _a
'_zoom _w
'_zoom _p
[Draw]\
^C^C_box
^C^C_mtext
^C^C_circle
^C^C_line
^C^C
// Row K View
^C^C_regenall
'_dsviewer
'_zoom _c
'_zoom .5x
'_zoom 2x
[Draw]\
^C^C_sphere
^C^C_dtext
^C^C_donut
^C^C_ray
'_zoom ;
//  Row L View
'_attdisp
^C^C_ucsicon
^C^C_tilemode 1 
^C^C^P_mspace ^P
^C^C^P_pspace ^P
[Draw]\
^C^C_cylinder
^C^C_solid
^C^C_spline
^C^C_xline
'_zoom ;
// Row M View
^C^C_render
^C^C_hide
^C^C_vports
^C^C_vports
^C^C_view
[Draw]\
^C^C_cone
^C^C_3dface
^C^C_ellipse
^C^C_mline
'_zoom ;
//  Row N View
^C^C_scene
^C^C_shade
^C^C_plan
^C^C_vpoint
^C^C_ddvpoint
[Draw]\
^C^C_wedge
$I=ACAD.image_3dobjects $I=ACAD.*
^C^C_block
^C^C_pline
'_pan
// Row O View
^C^C_light
^C^C_shademode
//
'_-view _nwiso
'_-view _back
'_-view _neiso
[Draw]\
^C^C_torus
^C^C_revsurf
*^C^C_point
^C^C_3dpoly
'_pan
//  Row P  View
^C^C_rmat
^C^C_fog
//
'_-view _left
'_-view _top
'_-view _right
[Draw]\
^C^C_extrude
^C^C_tabsurf
^C^C_bhatch
^C^C_polygon
'_pan
//  Row Q View
^C^C_matlib
^C^C_background
//
'_-view _swiso
'_-view _front
'_-view _seiso
[Draw]\
^C^C_revolve
^C^C_rulesurf
^C^C_boundary
^C^C_rectang
'_redrawall
//  Row R  View
^C^C_setuv
^C^C_rpref
//
^C^C_toolbar
'_-view _bottom
'_3dorbit
[Draw]\
^C^C_qleader
^C^C_edgesurf
^C^C_region
^C^C_arc
'_redrawall
**ENDTAB2

//      TABLET3 menu.  
//      This tablet menu is 9 colums wide by 13 rows high.
//      The equivalent area on the tablet drawing shows an empty column followed by three colums
//      that are slightly narrower than the normal columns.
//      The 9 tablet menu columns are used as follows:
//      -  3 tablet menu columns for the blank column in the tablet drawing
//      -  2 tablet menu columns for each of the 3 narrow tablet drawing columns 
//
***TABLET3
**TABLET3STD
//  Row 1
\
\
\
<<135
<<135
<<90
<<90
<<45
<<45
//  Row 2
\
\
\
<<180
<<180
<\
<\
<<0
<<0
//  Row 3
\
\
\
<<225
<<225
<<270
<<270
<<315
<<315
//  Row 4
\
\
\
^H
^H
^H
^H
^H
^H
//  Row 5
\
\
\
7/8\
7/8\
/16\
/16\
/32\
/32\
//  Row 6
\
\
\
1/2\
1/2\
5/8\
5/8\
3/4\
3/4\
//  Row 7
\
\
\
1/8\
1/8\
1/4\
1/4\
3/8\
3/8\
//  Row 8
\
\
\
-\
-\
/\
/\
X\
X\
//  Row 9
\
\
\
@\
@\
'\
'\
"\
"\
//  Row 10
\
\
\
7\
7\
8\
8\
9\
9\
//  Row 11
\
\
\
4\
4\
5\
5\
6\
6\
//  Row 12
\
\
\
1\
1\
2\
2\
3\
3\
//  Row 13
\
\
\
0\
0\
.\
.\
,\
,\
**ENDTAB3

//      This is the TABLET4 menu.  
//      It has been updated for this release.
//
***TABLET4
**TABLET4STD
//  Row S
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
//  Row T Insert
^C^C_insertobj
^C^C_import
^C^C_image
^C^C_xref
^C^C_insert
[Tool]\
^C^C_area
'_dist
^C^C_draworder
'_spell
[Edit]\
^C^C_u
^C^C_cutclip
^C^C_copyclip
//  Snap
_parallel
_endpoint
_midpoint
_intersect
_appint
_center
_quadrant
_tangent
[File]\
^C^C_new
^C^C_open
//  Row U Format
'_ddptype
'_style
'_linetype
'_color
'_layer
[Tool]\
^C^C_massprop
^C^C_list
'_id
'_setvar
[Edit]\
^C^C_redo
^C^C_pasteclip
^C^C_erase
// Snap
_from
_perpend
_insert
_node
_nearest
_extension
_none
'_+dsettings 2
[File]\
^C^C_qsave
^C^C_qsave
//  Row V Format
^C^C_rename
'_limits
'_thickness
'_units
^C^C_mlstyle
\
^C^C_saveimg
^C^C_replay
'_script
^C^C_appload
\
^C^C_measure
^C^C_divide
//
^C^C_erase
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_copy,^C^C_copy)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_mirror,^C^C_mirror)
^C^C_offset
^C^C_array
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_move,^C^C_move)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_rotate,^C^C_rotate)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_scale,^C^C_scale)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_stretch,^C^C_stretch)
\
^C^C_saveas
^C^C_pagesetup
//  Row W
^C^C_qdim
^C^C_qleader
^C^C_dimordinate
^C^C_dimaligned
^C^C_dimlinear
\
^C^C_ucs
^C^C_+ucsman 0
^C^C_+ucsman 1
'_dsettings
\
^C^C_dbconnect
^C^C_dbconnect
//
^C^C_lengthen
^C^C_trim
^C^C_extend
^C^C_break
^C^C_chamfer
^C^C_fillet
^C^C_3darray
^C^C_mirror3d
^C^C_rotate3d
\
^C^C_export
^C^C_plot
//  Row X
^C^C_tolerance
^C^C_dimcenter
^C^C_dimangular
^C^C_dimdiameter
^C^C_dimradius
\
^C^C_tablet
^C^C_group
^C^C_qselect
^C^C_find
\
'_adcenter
'_adcenter
//
^C^C_align
^C^C_union
^C^C_subtract
^C^C_intersect
^C^C_xclip
^C^C_xbind
^C^C_imageadjust
^C^C_transparency
^C^C_imageclip
\
^C^C_preview
^C^C_purge
//  Row Y
^C^C_dimedit
^C^C_dimtedit
^C^C_-dimstyle _apply
^C^C_dimoverride
'_dimstyle
\
'_help
^C^C_browser ;
^C^C_menuload
^C^C_options
\
^C^C_properties
^C^C_properties
//
'_matchprop
'_matchprop
^C^C_hatchedit
^C^C_pedit
^C^C_splinedit
^C^C_mledit
^C^C_attedit
^C^C_ddedit
^C^C_explode
\
^C^C_stylesmanager
^C^C_exit
**ENDTAB4

//
//   Where possible the ID name is the AutoCAD command name.
//   An ID is no more than 12 characters long.
//   Long command names are truncated (not abbreviated) to fit.
//   An ID names for a command opion appends the option to the command name:
//
//       Example:  the ID for Zoom Window is ID_ZoomWin
//
//   IDs are listed in alphabetical order.
//   Helps strings end with a colon, two spaces and the name of the command.
//

***HELPSTRINGS
ID_2doptim    [Set viewport to 2D wireframe:  SHADEMODE]
ID_3darray    [Creates a three-dimensional array:  3DARRAY]
ID_3dclip     [Starts 3DORBIT and opens the Adjust Clipping Planes window:  3DCLIP]
ID_3dclipbk   [Toggles the back clipping plane on or off in the 3D Orbit Adjust Clipping Planes window:  DVIEW]
ID_3dclipfr   [Toggles the front clipping plane on or off in the 3D Orbit Adjust Clipping Planes window:  DVIEW]
ID_3dcorbit   [Starts the 3DORBIT command with continuous orbit active in the 3D view:  3DCORBIT]
ID_3ddistanc  [Starts the 3DORBIT command and makes objects appear closer or farther away:  3DDISTANCE]
ID_3dface     [Creates a three-dimensional face:  3DFACE]
ID_3dmesh     [Creates a free-form polygon mesh:  3DMESH]
ID_3dorbit    [Controls the interactive viewing of objects in 3D:  3DORBIT]
ID_3dpan      [Starts the 3DORBIT command and enables you to drag the view horizontally and vertically:  3DPAN]
ID_3dpoly     [Creates a polyline of line segments in 3D space:  3DPOLY]
ID_3dsin      [Imports a 3D Studio file:  3DSIN]
ID_3dsurface  [Creates three-dimensional surface objects using a dialog box]
ID_3dswivel   [Starts the 3DORBIT command and simulates the effect of turning the camera:  3DSWIVEL]
ID_3dviews    [Sets the view to a predefined or named view]
ID_3dzoom     [Starts the 3DORBIT command and allows you to zoom in and out on the view:  3DZOOM]
ID_About      [Displays information about this product:  ABOUT]
ID_Acisin     [Imports an ACIS file:  ACISIN]
ID_AddPlotter [Adds and configures plotters]
ID_AddPlStyle [Creates a plot style table]
ID_Ai_box     [Creates a three-dimensional box polygon mesh]
ID_Ai_cone    [Creates a cone-shaped polygon mesh]
ID_Ai_dish    [Creates the lower half of a spherical polygon mesh]
ID_Ai_dome    [Creates the upper half of a spherical polygon mesh]
ID_Ai_fms     [Switches to floating model space]
ID_Ai_molc    [Makes the layer of a selected object the current layer]
ID_Ai_pyrami  [Creates a pyramid or a tetrahedron]
ID_Ai_sphere  [Creates a spherical polygon mesh]
ID_Ai_tiledv  [Displays layout options for named viewports:  +VPORTS]
ID_Ai_torus   [Creates a toroidal polygon mesh that is parallel to the XY plane of the current UCS]
ID_Ai_wedge   [Creates a right-angle wedge-shaped polygon mesh with the sloped face tapering along the X axis]
ID_Align      [Aligns objects with other objects in 2D and 3D:  ALIGN]
ID_Appload    [Loads and unloads applications and defines which applications to load at startup:  APPLOAD]
ID_Arc        [Creates an arc:  ARC]
ID_Arc3point  [Creates an arc using three points:  ARC]
ID_ArcCeStAn  [Creates an arc using the center, start point, and included angle:  ARC]
ID_ArcCeStEn  [Creates an arc using the center, start point, and endpoint:  ARC]
ID_ArcCeStLe  [Creates an arc using the center, start point, and length of chord:  ARC]
ID_ArcContin  [Creates an arc tangent to the last line or arc drawn:  ARC]
ID_ArcStCeAn  [Creates an arc using the start point, center, and included angle:  ARC]
ID_ArcStCeEn  [Creates an arc using the start point, center, and endpoint:  ARC]
ID_ArcStCeLe  [Creates an arc using the start point, center, and length of chord:  ARC]
ID_ArcStEnAg  [Creates an arc using the start point, endpoint, and included angle:  ARC]
ID_ArcStEnDi  [Creates an arc using the start point, endpoint, and starting direction:  ARC]
ID_ArcStEnRa  [Creates an arc using the start point, endpoint, and radius:  ARC]
ID_Area       [Calculates the area and perimeter of objects or of defined areas:  AREA]
ID_Array      [Creates multiple copies of objects in a pattern:  ARRAY]
ID_ASSIST     [Opens the Active Assistance window, which provides automatic or on-demand context-sensitive information: ASSIST]
ID_Attdef     [Creates an attribute definition:  ATTDEF]
ID_AttdispNo  [Retains current visibility setting of each attribute:  ATTDISP]
ID_AttdispOf  [Makes all attributes invisible:  ATTDISP OFF]
ID_AttdispOn  [Makes all attributes visible:  ATTDISP ON]
ID_AtteditGlo [Edits the variable attributes of a block:  -ATTEDIT]
ID_AtteditSin [Edits the variable attributes of a block:  ATTEDIT]
ID_Audit      [Evaluates the integrity of a drawing:  AUDIT]
ID_AUGI       [Starts Web browser and displays user group information]
ID_AULPIDE    [Starts the Visual LISP development environment:  VLISP]
ID_AULPLoad   [Loads an AutoLISP application:  APPLOAD]
ID_Back       [Navigates to the previous hyperlinked document:  HYPERLINKBACK]
ID_Backgroun  [Sets up the background for your scene:  BACKGROUND]
ID_Base       [Sets the insertion base point for the current drawing:  BASE]
ID_Bhatch     [Fills an enclosed area or selected objects with a hatch pattern:  BHATCH]
ID_Bmake      [Creates a block definition from selected objects:  BLOCK]
ID_BodyChk    [Validates a 3D solid object as a valid ACIS solid:  SOLIDEDIT]
ID_BodyCln    [Removes all redundant edges and vertices on a solid object:  SOLIDEDIT]
ID_Boundary   [Creates a region or a polyline from an enclosed area:  BOUNDARY]
ID_Box        [Creates a three-dimensional solid box:  BOX]
ID_Break      [Breaks the selected object between two points:  BREAK]
ID_Browser    [Launches the default Web browser defined in your system's registry:  BROWSER]
ID_BuyOnline  [Allows online purchase:  BUYONLINE]
ID_Camera     [Allows you to set a different camera and target location:  CAMERA]
ID_Cancel     [Cancels the command]
ID_Chamfer    [Bevels the edges of objects:  CHAMFER]
ID_Circle     [Creates a circle:  CIRCLE]
ID_Circle2pt  [Creates a circle using two endpoints of the diameter:  CIRCLE]
ID_Circle3pt  [Creates a circle using three points on the circumference:  CIRCLE]
ID_CircleDia  [Creates a circle using a specified diameter:  CIRCLE]
ID_CircleRad  [Creates a circle using a specified radius:  CIRCLE]
ID_CircleTTR  [Creates a circle tangent to two objects with a specified radius:  CIRCLE]
ID_CircleTTT  [Creates a circle tangent to three objects:  CIRCLE]
ID_CKeyboard  [Assigns keyboard shortcuts to commands:  CUSTOMIZE]
ID_CMNonLast  [Repeats the previously issued command]
ID_CMSelLast  [Repeats the previously issued command]
ID_Cone       [Creates a three-dimensional solid cone:  CONE]
ID_Content    [Manages and inserts content such as blocks, xrefs, and hatch patterns:  ADCENTER]
ID_Copy       [Duplicates objects:  COPY]
ID_Copybase   [Duplicates objects along with a specified base point:  COPYBASE]
ID_Copyclip   [Copies objects to the Windows Clipboard:  COPYCLIP]
ID_Copylink   [Copies the current view to the Windows Clipboard for linking to other OLE applications:  COPYLINK]
ID_CreateLayout [Creates a layout using the settings you apply to the wizard:  LAYOUTWIZARD]
ID_CToolbar   [Displays, creates, renames, and removes toolbars, and controls tooltips and button size:  CUSTOMIZE]
ID_CtrlColor  [Sets the default color for new objects and edits the color of existing objects]
ID_CtrlLayer  [Sets the default layer for new objects, edits the layer of existing objects, and switches between layer properties]
ID_CtrlLinet  [Sets the default linetype for new objects and edits the linetype of existing objects]
ID_CtrlLineW  [Sets the default lineweight for new objects and edits the lineweight of existing objects]
ID_CtrlPStyl  [Sets the default plot style for new objects and edits the plot style of existing objects]
ID_Cutclip    [Copies objects to the Windows Clipboard and removes the objects from the drawing:  CUTCLIP]
ID_Cylinder   [Creates a three-dimensional solid cylinder:  CYLINDER]
ID_dbConnect  [Provides an AutoCAD interface to external database tables:  DBCONNECT]
ID_Ddcolor    [Sets the color for new objects:  COLOR]
ID_Ddedit     [Edits text, dimension text, and attribute definitions:  DDEDIT]
ID_Ddim       [Creates and modifies dimension styles:  DIMSTYLE]
ID_Ddinsert   [Inserts a block or a drawing in the current drawing:  INSERT]
ID_Ddptype    [Specifies the display style and size of point objects:  DDPTYPE]
ID_Ddrename   [Changes the names of named objects:  RENAME]
ID_Ddrmodes   [Sets grid and snap, polar tracking, and object snap modes:  DSETTINGS]
ID_Dducs      [Manages defined user coordinate systems:  +UCSMAN]
ID_Dducsp     [Manages defined user coordinate systems:  +UCSMAN]
ID_Ddview     [Saves and restores views by name:  VIEW]
ID_Ddvpoint   [Sets the three-dimensional viewing direction:  DDVPOINT]
ID_Deselectall [Removes all objects from the selection set]
ID_DevHelp    [Displays online developer help]
ID_DevRes     [Displays the Autodesk Resource Guide Online Web site in the default browser:  BROWSER]
ID_DimAbove   [Move dimension text above dimension line]
ID_Dimaligne  [Creates an aligned linear dimension:  DIMALIGNED]
ID_Dimangula  [Creates an angular dimension:  DIMANGULAR]
ID_Dimbaseli  [Continues a linear, angular, or ordinate dimension from the baseline of the previous or selected dimension:  DIMBASELINE]
ID_Dimcenter  [Creates the center mark or the center lines of circles and arcs:  DIMCENTER]
ID_Dimcontin  [Continues a linear, angular, or ordinate dimension from the second extension line of the previous or a selected dimension:  DIMCONTINUE]
ID_Dimdiamet  [Creates diameter dimensions for circles and arcs:  DIMDIAMETER]
ID_Dimedit    [Edits dimensions:  DIMEDIT]
ID_Dimedito   [Makes the extension lines of linear dimensions oblique:  DIMEDIT]
ID_DimHome    [Move dimension text back to its default position]
ID_Dimlinear  [Creates linear dimensions:  DIMLINEAR]
ID_Dimordina  [Creates ordinate point dimensions:  DIMORDINATE]
ID_Dimoverri  [Overrides dimension system variables:  DIMOVERRIDE]
ID_DimPrec0   [Sets the dimension value to 0 decimal places]
ID_DimPrec1   [Sets the dimension value to 1 decimal place]
ID_DimPrec2   [Sets the dimension value to 2 decimal places]
ID_DimPrec3   [Sets the dimension value to 3 decimal places]
ID_DimPrec4   [Sets the dimension value to 4 decimal places]
ID_DimPrec5   [Sets the dimension value to 5 decimal places]
ID_DimPrec6   [Sets the dimension value to 6 decimal places]
ID_Dimradius  [Creates radius dimensions for circles and arcs:  DIMRADIUS]
ID_DimSty2    [Saves the properties of the selected dimension as a new dimension style]
ID_DimSty3    [Assigns the style to the selected dimension(s)]
ID_DimSty4    [Assigns the style to the selected dimension(s)]
ID_DimSty5    [Assigns the style to the selected dimension(s)]
ID_DimSty6    [Assigns the style to the selected dimension(s)]
ID_DimSty7    [Assigns the style to the selected dimension(s)]
ID_DimSty8    [Assigns the style to the selected dimension(s)]
ID_DimSty9    [Displays other available dimension styles]
ID_DimstyleA  [Updates dimension objects with the current dimension style:  -DIMSTYLE]
ID_Dimtedit   [Moves and rotates dimension text :  DIMTEDIT]
ID_DimteditA  [Rotates dimension text to an angle:  DIMTEDIT]
ID_DimteditC  [Centers dimension text:  DIMTEDIT]
ID_DimteditH  [Moves dimension text back to its default position:  DIMTEDIT]
ID_DimteditL  [Left justifies dimension text:  DIMTEDIT]
ID_DimteditR  [Right justifies dimension text:  DIMTEDIT]
ID_DimTxtCen  [Moves dimension text to center position]
ID_DimTxtMove0 [Moves dimension text with dimension line]
ID_DimTxtMove1 [Move dimension text with leader]
ID_DimTxtMove2 [Move dimension text alone]
ID_DimUpdate  [Updates the style of a dimension:  DIMSTYLE]
ID_Dist       [Measures the distance and angle between two points:  DIST]
ID_Divide     [Places evenly spaced point objects or blocks along the length or perimeter of an object:  DIVIDE]
ID_Donut      [Creates filled circles and rings:  DONUT]
ID_DrawordeA  [Forces selected objects to be displayed in front of a reference object:  DRAWORDER]
ID_DrawordeB  [Forces selected objects to be displayed behind all other objects:  DRAWORDER]
ID_DrawordeF  [Forces selected objects to be displayed in front of all other objects:  DRAWORDER]
ID_Draworder  [Changes the display order of images and other objects:  DRAWORDER]
ID_DrawordeU  [Forces selected objects to be displayed behind a reference object:  DRAWORDER]
ID_Dsviewer   [Opens the Aerial View window:  DSVIEWER]
ID_Dtext      [Displays text on screen as it is entered:  DTEXT]
ID_DWG_CLOSE  [Closes the current drawing:  CLOSE]
ID_Dxbin      [Imports specially coded binary files:  DXBIN]
ID_Edge       [Changes the visibility of three-dimensional face edges:  EDGE]
ID_EdgeColor  [Changes the color of individual edges on a solid object:  SOLIDEDIT]
ID_EdgeCopy   [Copies 3D edges on a solid object as an arc, circle, ellipse, line, or spline:  SOLIDEDIT]
ID_Edgesurf   [Creates a three-dimensional polygon mesh:  EDGESURF]
ID_Ellipse    [Creates an ellipse or an elliptical arc:  ELLIPSE]
ID_EllipseAr  [Creates an elliptical arc:  ELLIPSE]
ID_EllipseAx  [Creates an ellipse or an elliptical arc:  ELLIPSE]
ID_EllipseCe  [Creates an ellipse using a specified center point:  ELLIPSE]
ID_Enter      [Completes a command, accepts command values, and cycles grip modes]
ID_Erase      [Removes objects from a drawing:  ERASE]
ID_Etransmit  [Creates a transmittal set of a drawing and related files:  ETRANSMIT]
ID_Explode    [Breaks a compound object into its component objects:  EXPLODE]
ID_Export     [Saves objects to other file formats:  EXPORT]
ID_Extend     [Extends an object to meet another object:  EXTEND]
ID_Extrude    [Creates unique solid primitives by extruding existing two-dimensional objects:  EXTRUDE]
ID_FaceColor  [Changes the color of individual faces on a solid object:  SOLIDEDIT]
ID_FaceCopy   [Copies faces on a solid object as a region or a solid body:  SOLIDEDIT]
ID_FaceDel    [Deletes or removes faces, including fillets or chamfers on a solid object:  SOLIDEDIT]
ID_FaceExtru  [Extrudes selected faces on a solid object to a specified height or along a path:  SOLIDEDIT]
ID_FaceMove   [Moves selected faces on a solid object to a specified height or distance:  SOLIDEDIT]
ID_FaceOffse  [Equally offsets faces on a solid object by a specified distance or point:  SOLIDEDIT]
ID_FaceRotat  [Rotates one or more faces on a solid object around a specified axis:  SOLIDEDIT]
ID_FaceTaper  [Tapers faces on a solid object with a specified angle:  SOLIDEDIT]
ID_Fillet     [Rounds and fillets the edges of objects:  FILLET]
ID_Filter     [Quickly creates selection sets based on filtering criteria:  QSELECT]
ID_Flat       [Set viewport to flat shaded:  SHADEMODE]
ID_FlatEdges  [Set viewport to flat shaded, edges on:  SHADEMODE]
ID_Fog        [Provides visual cues for the apparent distance of objects:  FOG]
ID_Forward    [Navigates to the next hyperlinked document:  HYPERLINKFWD]
ID_From       [Locates a point offset from a reference point within a command:  FROM]
ID_GotoURL    [Loads the Web browser and searches for the location embedded in the selected object:  GOTOURL]
ID_Gouraud    [Set viewport to Gouraud shaded:  SHADEMODE]
ID_GourEdges  [Set viewport to Gouraud shaded, edges on:  SHADEMODE]
ID_GripBase   [Sets the insertion base point for the current drawing:  BASE]
ID_GripCopy   [Duplicates objects:  COPY]
ID_GripExit   [Cancels grip edit mode and returns to the command line:  EXIT]
ID_GripMirro  [Creates a mirror image copy of objects:  MIRROR]
ID_GripMove   [Displaces objects a specified distance in a specified direction:  MOVE]
ID_GripRefer  [Sets the reference point:  REFERENCE]
ID_GripRotat  [Moves objects about a base point:  ROTATE]
ID_GripScale  [Enlarges or reduces objects proportionally in the X, Y, and Z directions:  SCALE]
ID_GripStret  [Moves or stretches objects:  STRETCH]
ID_GripUndo   [Reverses the most recent operation:  U]
ID_Group      [Creates a named selection set of objects:  GROUP]
ID_Hatchedit  [Modifies an existing hatch object:  HATCHEDIT]
ID_Help       [Displays online help:  HELP]
ID_Hidden     [Set viewport to hidden line:  SHADEMODE]
ID_Hide       [Regenerates a 3D model with hidden lines suppressed:  HIDE]
ID_HlnkBack   [Navigates to the previous hyperlinked document:  HYPERLINKBACK]
ID_HlnkFwd    [Navigates to the next hyperlinked document:  HYPERLINKFWD]
ID_HlnkStop   [Cancels the current navigation selection:  HYPERLINKSTOP]
ID_Hyperlink  [Attaches a hyperlink to an object or modifies an existing hyperlink:  HYPERLINK]
ID_Id         [Displays the coordinate values of a location:  ID]
ID_Image      [Inserts images in many formats into an AutoCAD drawing file:  IMAGE]
ID_Imageadju  [Controls the image display of the brightness, contrast, and fade values of images:  IMAGEADJUST]
ID_Imageatta  [Attaches a new image to the current drawing:  IMAGEATTACH]
ID_Imageclip  [Creates new clipping boundaries for an image object:  IMAGECLIP]
ID_Imagefram  [Controls whether image frames are displayed or hidden from view:  IMAGEFRAME]
ID_Imagequal  [Controls the display quality of images:  IMAGEQUALITY]
ID_Import     [Imports various file formats:  IMPORT]
ID_ImpPlotSet [Displays a wizard to import PCP and PC2 configuration file plot settings into the Model tab or current layout:  PCINWIZARD]
ID_Imprint    [Imprints geometry on a face of a solid object:  SOLIDEDIT]
ID_Insertobj  [Inserts a linked or embedded object:  INSERTOBJ]
ID_Interfere  [Creates a composite 3D solid from the common volume of two or more solids:  INTERFERE]
ID_Intersect  [Creates solids or regions from the intersection of solids or regions:  INTERSECT]
ID_Layer      [Manages layers and layer properties:  LAYER]
ID_LayNew     [Creates a new layout tab:  -LAYOUT]
ID_LayoutWiz  [Creates a new Layout tab and specifies page and plot settings:  LAYOUTWIZARD]
ID_LayTemp    [Displays the Select File dialog box from which to select an existing template to base the new layout:  -LAYOUT]
ID_Leader     [Creates a leader and annotation:  QLEADER]
ID_Lengthen   [Changes the length of objects and the included angle of arcs:  LENGTHEN]
ID_Light      [Manages lights and lighting effects:  LIGHT]
ID_Limits     [Sets and controls the limits of the grid display in the current Model or Layout tab:  LIMITS]
ID_Line       [Creates straight line segments:  LINE]
ID_Linetype   [Loads and sets linetypes:  LINETYPE]
ID_Linewt     [Sets the current lineweight, lineweight display options, and lineweight units:  LWEIGHT]
ID_Links      [Updates, changes, and cancels existing OLE links:  OLELINKS]
ID_List       [Displays database information for selected objects:  LIST]
ID_Lsedit     [Edits a landscape object:  LSEDIT]
ID_Lslib      [Maintains libraries of landscape objects:  LSLIB]
ID_Lsnew      [Adds realistic landscape items, such as trees and bushes, to your drawings:  LSNEW]
ID_MARKUP     [Inserts markups from an RML file:  RMLIN]
ID_Massprop   [Calculates and displays the mass properties of regions or solids:  MASSPROP]
ID_Matchprop  [Applies the properties of a selected object to other objects:  MATCHPROP]
ID_Matlib     [Imports and exports materials to and from a library of materials:  MATLIB]
ID_Measure    [Places point objects or blocks at measured intervals on an object:  MEASURE]
ID_MeetNow    [Shares the current session of the application among multiple users across a network:  MEETNOW]
ID_Menuload   [Loads partial menu files:  MENULOAD]
ID_Mirror     [Creates a mirror image copy of objects:  MIRROR]
ID_Mirror3d   [Creates a mirror image copy of objects about a plane:  MIRROR3D]
ID_Mledit     [Edits multiple parallel lines:  MLEDIT]
ID_Mline      [Creates multiple parallel lines:  MLINE]
ID_Mlstyle    [Manages styles for multiple parallel lines:  MLSTYLE]
ID_Modify     [Controls properties of existing objects:  PROPERTIES]
ID_Move       [Displaces objects a specified distance in a specified direction:  MOVE]
ID_MRU        [Opens this drawing]
ID_Mtedit     [Opens the Mulitline Text Editor for the selected mtext object:  MTEDIT]
ID_Mtext      [Creates a multiple-line text object:  MTEXT]
ID_New        [Creates a new drawing file:  NEW]
ID_NewLayout  [Creates and modifies drawing Layout tabs:  LAYOUT]
ID_Offset     [Creates concentric circles, parallel lines, and parallel curves:  OFFSET]
ID_Open       [Opens an existing drawing file:  OPEN]
ID_Osnap      [Sets running object snap modes:  OSNAP]
ID_OsnapAppa  [Snaps to the apparent intersection of two objects:  APPINT]
ID_OsnapCent  [Snaps to the center of an arc, circle, ellipse, or elliptical arc:  CEN]
ID_OsnapEndp  [Snaps to the closest endpoint of an object:  ENDP]
ID_OsnapExte  [Snaps to the phantom extension of an arc or line:  EXT]
ID_OsnapInse  [Snaps to the insertion point of objects such as text, blocks, or attributes:  INS]
ID_OsnapInte  [Snaps to the intersection of two objects:  INT]
ID_OsnapMidp  [Snaps to the midpoint of an object:  MID]
ID_OsnapNear  [Snaps to the nearest point on an object:  NEA]
ID_OsnapNode  [Snaps to a point object:  NOD]
ID_OsnapNone  [Suppresses running object snap for the current selection:  NON]
ID_OsnapPara  [Snaps parallel to a specified line:  PAR]
ID_OsnapPerp  [Snaps to a point perpendicular to an object:  PER]
ID_OsnapQuad  [Snaps to a quadrant point of an arc, circle, ellipse, or elliptical arc:  QUA]
ID_OsnapTang  [Snaps to the tangent of an arc, circle, ellipse, elliptical arc, or spline:  TAN]
ID_Pan        [Moves the view in the current viewport:  PAN]
ID_PanDown    [Moves the view down:  PAN]
ID_PanLeft    [Moves the view to the left:  PAN]
ID_PanPick    [Moves the view by the specified distance:  -PAN]
ID_PanRight   [Moves the view to the right:  PAN]
ID_PanUp      [Moves the view up:  PAN]
ID_PartialOp  [Loads additional geometry into a partially opened drawing:  PARTIALOAD]
ID_Pastebloc  [Pastes a copied block into a new drawing:  PASTEBLOCK]
ID_Pasteclip  [Inserts data from the Windows Clipboard:  PASTECLIP]
ID_Pastehlnk  [Pastes a hyperlink to the selected object:  PASTEASHYPERLINK]
ID_Pasteorig  [Pastes a copied object into a new drawing using the coordinates from the original drawing:  PASTEORIG]
ID_Pastesp    [Inserts data from the Windows Clipboard and controls the format of the data:  PASTESPEC]
ID_Pedit      [Edits polylines and three-dimensional polygon meshes:  PEDIT]
ID_PenSetting [Creates a color-dependent plot style table:  R14PENWIZARD]
ID_PlanCurre  [Displays the plan view of a specified user coordinate system:  PLAN]
ID_PlanUCS    [Displays the plan view of a previously saved user coordinate system:  PLAN]
ID_PlanWorld  [Displays the plan view of the World Coordinate System:  PLAN]
ID_Pline      [Creates a 2D polyline:  PLINE]
ID_PlotMgr    [Displays the Plotter Manager, where you can launch the Add-a-Plotter wizard and the Plotter Configuration Editor:  PLOTTERMANAGER]
ID_PlotSetup  [Specifies the layout page, plotting device, paper size, and settings for each new layout:  PAGESETUP]
ID_PlotStyle  [Sets the current plot style for new objects, or the assigned plot style for selected objects:  PLOTSTYLE]
ID_PlotStyMgr [Provides access to the Add Plot Style Table wizard and the Plot Style Table Editor:  STYLESMANAGER]
ID_PointA     [Displays Autodesk Point A in the default browser:  BROWSER]
ID_PointFilx  [Specifies a .X point filter:  .X]
ID_PointFily  [Specifies a .Y point filter:  .Y]
ID_PointFilz  [Specifies a .Z point filter:  .Z]
ID_PointFixy  [Specifies a .XY point filter:  .XY]
ID_PointFixz  [Specifies a .XZ point filter:  .XZ]
ID_PointFiyz  [Specifies a .YZ point filter:  .YZ]
ID_PointMult  [Creates multiple point objects:  POINT]
ID_PointSing  [Creates a point object:  POINT]
ID_Polygon    [Creates an equilateral closed polyline:  POLYGON]
ID_Preferenc  [Customizes settings:  OPTIONS]
ID_Preview    [Shows how the drawing will look when it is printed or plotted:  PREVIEW]
ID_Print      [Prints a drawing to a plotter, printer, or file:  PLOT]
ID_ProdSupp   [Accesses the Autodesk Product Support Site on Point A]
ID_Props      [Sets and displays the file properties of the current drawing:  DWGPROPS]
ID_Publish    [Creates HTML pages that include images of selected drawings:  PUBLISHTOWEB]
ID_Purge      [Removes unused items such as block definitions and layers from the drawing:  PURGE]
ID_QDim       [Quickly create dimension arrangements:  QDIM]
ID_Qselect    [Quickly creates selection sets based on filtering criteria:  QSELECT]
ID_Ray        [Creates a semi-infinite line:  RAY]
ID_Recover    [Repairs a damaged drawing:  RECOVER]
ID_Rectang    [Creates a rectangular polyline:  RECTANG]
ID_Redo       [Reverses the effects of the previous UNDO or U command:  REDO]
ID_Redrawall  [Refreshes the display of all viewports:  REDRAWALL]
ID_RefAdd     [Transfers objects from the host drawing to the REFEDIT working set:  REFSET]
ID_RefDscrd   [Discards REFEDIT working set changes:  REFCLOSE]
ID_RefEditor  [Selects a block or xref for in-place editing:  REFEDIT]
ID_RefRemove  [Transfers objects from the REFEDIT working set to the host drawing:  REFSET]
ID_RefSave    [Saves REFEDIT working set changes:  REFCLOSE]
ID_Regen      [Regenerates the entire drawing from the drawing database:  REGEN]
ID_RegenAll   [Regenerates the drawing and refreshes all viewports:  REGENALL]
ID_Region     [Converts an object that encloses an area into a region object:  REGION]
ID_Render     [Creates a photorealistic or realistically shaded image of a three-dimensional wireframe or solid model :  RENDER]
ID_Replay     [Displays a BMP, TGA, or TIFF image:  REPLAY]
ID_Revolve    [Creates a solid by revolving a two-dimensional object about an axis:  REVOLVE]
ID_Revsurf    [Creates a revolved surface about a selected axis:  REVSURF]
ID_Rmat       [Manages rendering materials:  RMAT]
ID_Rotate     [Rotates objects about a base point:  ROTATE]
ID_Rotate3d   [Moves objects about a three-dimensional axis:  ROTATE3D]
ID_Rpref      [Sets rendering preferences:  RPREF]
ID_Rulesurf   [Creates a ruled surface between two curves:  RULESURF]
ID_Save       [Saves the current drawing:  QSAVE]
ID_Saveas     [Saves a copy of the current drawing under a new file name:  SAVEAS]
ID_Saveimg    [Saves a rendered image to a file:  SAVEIMG]
ID_Scale      [Enlarges or reduces objects proportionally in the X, Y, and Z directions:  SCALE]
ID_Scene      [Manages scenes in model space:  SCENE]
ID_Script     [Executes a sequence of commands from a script file:  SCRIPT]
ID_Section    [Uses the intersection of a plane and solids to create a region:  SECTION]
ID_SendMail   [Sends the current drawing file as an email attachment or FAX:  SENDMAIL]
ID_Separate   [Separates 3D solid objects with disjointed volumes into independent 3D solid objects:  SOLIDEDIT]
ID_Setuv      [Maps materials onto objects:  SETUV]
ID_Setvar     [Lists or changes the values of system variables:  SETVAR]
ID_Shell      [Creates a hollow, thin wall with a specified thickness on a solid object:  SOLIDEDIT]
ID_Slice      [Slices a set of solids with a plane:  SLICE]
ID_Soldraw    [Generates profiles and sections in viewports created with the SOLVIEW command:  SOLDRAW]
ID_Solid      [Creates solid-filled polygons:  SOLID]
ID_Solprof    [Creates profile images of three-dimensional solids:  SOLPROF]
ID_Solview    [Creates floating viewports using orthographic projection to lay out multi- and sectional view drawings of 3D solid and body objects:  SOLVIEW]
ID_Spell      [Checks the spelling of selected text:  SPELL]
ID_Sphere     [Creates a three-dimensional solid sphere:  SPHERE]
ID_Spline     [Creates a nonuniform rational B-spline (NURBS) curve:  SPLINE]
ID_Splinedit  [Edits a spline or spline-fit polyline:  SPLINEDIT]
ID_Stats      [Displays rendering statistics:  STATS]
ID_Status     [Displays drawing statistics, modes, and extents:  STATUS]
ID_Stop       [Cancels the current navigation selection:  HYPERLINKSTOP]
ID_Stretch    [Moves or stretches objects:  STRETCH]
ID_Style      [Creates, modifies, or sets named text styles in your drawing:  STYLE]
ID_Subtract   [Creates a composite region or solid by subtraction:  SUBTRACT]
ID_Support    [Provides technical support and troubleshooting tips]
ID_TabletCal  [Calibrates the digitizer with the drawing's coordinate system:  TABLET]
ID_TabletCfg  [Designates or realigns the tablet menu areas:  TABLET]
ID_TabletOff  [Turns Tablet mode off:  TABLET]
ID_TabletOn   [Turns Tablet mode on:  TABLET]
ID_Tabsurf    [Creates a tabulated surface from a path curve and a direction vector:  TABSURF]
ID_TbCadStd   [CAD Standards Toolbar]
ID_TbDimensi  [Dimension Toolbar]
ID_TbDraw     [Draw Toolbar]
ID_TbExtdb    [External Database Toolbar]
ID_TbInquiry  [Inquiry Toolbar]
ID_TbInsert   [Insert Toolbar]
ID_TbLayouts  [Layouts Toolbar]
ID_TbModifII  [Modify II Toolbar]
ID_TbModify   [Modify Toolbar]
ID_TbObjectP  [Object Properties Toolbar]
ID_TbOrbit    [Orbit Toolbar]
ID_TbOsnap    [Object Snap Toolbar]
ID_TbRefedit  [Reference Edit Toolbar]
ID_TbReferen  [Reference Toolbar]
ID_TbRender   [Render Toolbar]
ID_TbShading  [Shade Toolbar]
ID_TbSolids   [Solids Toolbar]
ID_TbSolids2  [Solids Editing Toolbar]
ID_TbStandar  [Standard Toolbar]
ID_TbSurface  [Surfaces Toolbar]
ID_TbText     [Text Toolbar]
ID_TbUcs      [UCS Toolbar]
ID_TbUcsName  [UCS II Toolbar]
ID_TbViewpoi  [Viewpoint Toolbar]
ID_TbVpCreat  [Viewport Creation Toolbar]
ID_TbWeb      [Web Toolbar]
ID_TbZoom     [Zoom Toolbar]
ID_TextFind   [Finds, replaces, selects, or zooms to specified text:  FIND]
ID_Textscr    [Opens the text window:  TEXTSCR]
ID_Thickness  [Sets the current 3D thickness:  THICKNESS]
ID_Time       [Displays the date and time statistics of the current drawing:  TIME]
ID_TmplLayou  [Inserts a new layout based on an existing layout template:  LAYOUT]
ID_Today      [Opens the Today window:  TODAY]
ID_Tolerance  [Creates geometric tolerances:  TOLERANCE]
ID_Toolbar    [Displays, hides, and customizes toolbars:  TOOLBAR]
ID_Torus      [Creates a donut-shaped solid:  TORUS]
ID_Tracking   [Creates a temporary point used by Osnaps:  TT]
ID_Transpare  [Controls whether background pixels in an image are transparent or opaque:  TRANSPARENCY]
ID_Trim       [Trims objects at a cutting edge defined by other objects:  TRIM]
ID_U          [Reverses the most recent action:  U]
ID_Ucs        [Manages user coordinate systems:  UCS]
ID_Ucs3point  [Specifies the new UCS origin and the direction of the X and Y axes:  UCS]
ID_UcsApply   [Applies current UCS to a selected viewport:  UCS]
ID_UcsBack    [Specifies the Back UCS orientation:  UCS]
ID_UcsBottom  [Specifies the Bottom UCS orientation:  UCS]
ID_UcsCombo   [Changes the UCS]
ID_UcsFace    [Defines a new coordinate system based on a selected face:  UCS]
ID_UcsFront   [Specifies the Front UCS orientation:  UCS]
ID_UcsiconOn  [Controls the visibility and placement of the UCS icon:  UCSICON]
ID_UcsiconOr  [Displays the UCS icon at the origin of the user coordinate system:  UCSICON]
ID_UcsiconPr  [Controls the style, size and color of the UCS icon:  UCSICON]
ID_UcsLeft    [Specifies the Left UCS orientation:  UCS]
ID_UcsMove    [Moves the defined UCS:  UCS]
ID_UcsObject  [Defines a new coordinate system based on a selected object:  UCS]
ID_UcsOrigin  [Defines a new UCS by shifting the origin:  UCS]
ID_UcsPrevio  [Restores the previous UCS:  UCS]
ID_UcsRight   [Specifies the Right UCS orientation:  UCS]
ID_UcsTop     [Specifies the Top UCS orientation:  UCS]
ID_UcsView    [Establishes a new coordinate system with the XY plane parallel to the screen:  UCS]
ID_UcsWorld   [Sets the UCS to the World Coordinate System:  UCS]
ID_UcsXAxRot  [Rotates the current UCS about the X axis:  UCS]
ID_UcsYAxRot  [Rotates the current UCS about the Y axis:  UCS]
ID_UcsZAxRot  [Rotates the current UCS about the Z axis:  UCS]
ID_UcsZAxVec  [Defines a UCS using a positive Z axis extrusion method:  UCS]
ID_Union      [Creates a composite region or solid by addition:  UNION]
ID_Units      [Controls coordinate and angle display formats and determines precision:  UNITS]
ID_VBAIDE     [Displays the Visual Basic Editor:  VBAIDE]
ID_VBALoad    [Loads a global VBA project into the current AutoCAD session:  VBALOAD]
ID_VBAMan     [Loads, unloads, saves, creates, embeds, and extracts VBA projects:  VBAMAN]
ID_VBARun     [Runs a VBA macro:  VBARUN]
ID_VpClip     [Clips a paperspace viewport:  VPCLIP]
ID_VpConvert  [Converts an object to a paperspace viewport:  -VPORTS]
ID_VpDialog   [Displays the Viewports dialog:  VPORTS]
ID_VpointBac  [Sets the view point to back:  VIEW]
ID_VpointBot  [Sets the view point to bottom:  VIEW]
ID_VpointFro  [Sets the view point to front:  VIEW]
ID_VpointLef  [Sets the view point to left:  VIEW]
ID_VpointNE   [Sets the view point to northeast isometric:  VIEW]
ID_VpointNW   [Sets the view point to northwest isometric:  VIEW]
ID_VpointRig  [Sets the view point to right:  VIEW]
ID_VpointSE   [Sets the view point to southeast isometric:  VIEW]
ID_VpointSW   [Sets the view point to southwest isometric:  VIEW]
ID_VpointTop  [Sets the view point to top:  VIEW]
ID_VpointTri  [Displays a compass and tripod for defining a view direction in model space:  VPOINT]
ID_Vport_dispoff [Turns off a viewport, making its objects invisible:  -VPORTS]
ID_Vport_dispon [Turns on a viewport, making it active and making its objects visible:  -VPORTS]
ID_Vport_hideoff [Disables the ability to remove hidden lines from a viewport during plotting:  -VPORTS]
ID_Vport_hideon [Removes hidden lines from a viewport during plotting from paper space:  -VPORTS]
ID_Vport_lockoff [Unlocks the current viewport:  -VPORTS]
ID_Vport_lockon [Locks the current viewport. This is similar to layer locking:  -VPORTS]
ID_VportClip  [Clips viewport objects:  VPCLIP]
ID_Vports2    [Creates two equal viewports:  -VPORTS]
ID_Vports3    [Creates three viewports:  -VPORTS]
ID_Vports4    [Creates four viewports of equal size:  -VPORTS]
ID_VportsDel  [Specifies a closed polyline, ellipse, spline, region, or circle to convert into a viewport:  -VPORTS]
ID_VportsJoi  [Combines two adjacent viewports into one larger viewport:  -VPORTS]
ID_VportsRes  [Creates an irregularly shaped viewport defined by specifying points:  -VPORTS]
ID_VportsSav  [Opens a new viewport using a specified name:  +VPORTS]
ID_VportsSin  [Returns the drawing to a single viewport view, using the view from the active viewport:  VPORTS]
ID_VpPoly     [Creates an irregularly shaped viewport using specified points:  -VPORTS]
ID_VPScale    [Sets the viewport scale for new viewports and edits the viewport scale of existing viewports]
ID_VpSingle   [Creates a single paperspace viewport:  -VPORTS]
ID_Wedge      [Creates a 3D solid with a sloped face tapering along the X axis:  WEDGE]
ID_Wireframe  [Set viewport to 3D wireframe:  SHADEMODE 3]
ID_Wmfin      [Imports a file in Windows metafile format:  WMFIN]
ID_Xattach    [Attaches an external reference to the current drawing:  XATTACH]
ID_Xbind      [Binds dependent symbols of an xref to the current drawing:  XBIND]
ID_Xclip      [Defines an xref or block clipping boundary and sets the front or back clipping planes:  XCLIP]
ID_Xclipfram  [Controls the visibility of the xref or block clipping boundaries:  XCLIPFRAME]
ID_Xline      [Creates an infinite line:  XLINE]
ID_Xref       [Controls external references to drawing files:  XREF]
ID_XrefClip   [Defines an xref or block clipping boundary and sets the front or back clipping planes:  XCLIP]
ID_ZoomAll    [Zooms to display the drawing extents or the grid limits:  ZOOM]
ID_ZoomCente  [Zooms to display a view specified by a center point and magnification or height:  ZOOM]
ID_ZoomDynam  [Zooms to display the generated portion of the drawing:  ZOOM]
ID_ZoomExten  [Zooms to display the drawing extents:  ZOOM]
ID_ZoomIn     [Zooms to increase the apparent size of objects:  ZOOM]
ID_ZoomOut    [Zooms to decrease the apparent size of objects:  ZOOM]
ID_ZoomPrevi  [Zooms to display the previous view:  ZOOM]
ID_ZoomRealt  [Zooms to increase or decrease the apparent size of objects in the current viewport:  ZOOM]
ID_ZoomScale  [Zooms the display using a specified scale factor:  ZOOM]
ID_ZoomWindo  [Zooms to display an area specified by a rectangular window:  ZOOM]
ID_BreakSele  [Breaks selected object at a single point:  BREAK]
ID_LayerP     [Restores the previous layer settings:  LAYERP]
ID_Dimreasso  [Associates or reassociates selected dimensions to objects or points on objects:  DIMREASSOCIATE]
ID_Scaletext  [Scales selected text objects:  SCALETEXT]
ID_Justifyte  [Sets justification for selected text:  JUSTIFYTEXT]
ID_Spacetran  [Converts distances or heights between model space and paper space:  SPACETRANS]
ID_Standards  [Configures CAD standards for the current drawing:  STANDARDS]
ID_CheckStan  [Checks the current drawing for compliance with its CAD Standards:  CHECKSTANDARDS]
ID_LayTrans   [Translates layer names and properties:  LAYTRANS]
ID_BattMan    [Manages attributes on block definitions:  BATTMAN]
ID_AttSync    [Updates block inserts to reflect new and changed attributes on block definitions:  ATTSYNC]
ID_EAttExt    [Extracts attributes from blocks into a separate file:  EATTEXT]
ID_EAttEdit   [Edits attributes on a block insert:  EATTEDIT]
ID_Blockdsc   [Modifies the text description associated with a block definition:  BLOCK]
ID_SelAll     [Selects all objects on thawed layers]
ID_BupdateA   [Generates preview images for blocks displayed in AutoCAD DesignCenter:  BLOCKICON]
ID_Ai_propch  [Controls properties of existing objects:  PROPERTIES]
ID_LAssist    [Starts Learning Assistance]
ID_WhatsNew   [Describes new features in this product]


//
//  Keyboard Accelerators
//
//  If a keyboard accelerator is preceded by an ID string that references a menu item
//  in a pull-down menu, then the keyboard accelerator will run the command referenced
//  by that menu item.  The additonal keyword "TOOLBAR+" restricts the same search to the 
//  Toolbar section while "INTERNAL+" matches those commands provided on the Commands
//  page of the Customize dialog.
//
***ACCELERATORS
// Bring up hyperlink dialog
ID_Hyperlink [TOOLBAR+CONTROL+"K"]
// Toggle Orthomode
[CONTROL+"L"]^O
// Next Viewport
[CONTROL+"R"]^V
ID_SelAll    [CONTROL+"A"]
ID_Copyclip  [TOOLBAR+CONTROL+"C"]
ID_New       [TOOLBAR+CONTROL+"N"]
ID_Open      [TOOLBAR+CONTROL+"O"]
ID_Print     [TOOLBAR+CONTROL+"P"]
ID_Save      [TOOLBAR+CONTROL+"S"]
ID_Pasteclip [TOOLBAR+CONTROL+"V"]
ID_Cutclip   [TOOLBAR+CONTROL+"X"]
ID_Redo      [CONTROL+"Y"]
ID_U         [CONTROL+"Z"]
ID_Ai_propch [TOOLBAR+CONTROL+"1"]
ID_Content   [TOOLBAR+CONTROL+"2"]
ID_dbConnect [CONTROL+"6"]
ID_VBARun    [ALT+"F8"]
ID_VBAIDE    [ALT+"F11"]
[CONTROL+"H"]+
'_setvar;pickstyle;$M=$(if,$(eq,$(getvar,pickstyle),0),1,$(if,$(eq,$(getvar,pickstyle),1),0,+
$(if,$(eq,$(getvar,pickstyle),2),3,2)))